New software - Version 3.39

Software update notifications
Dataman (Daniel Smith)
Posts: 2263
Joined: 09 Nov 2011 14:36

New software - Version 3.39

Postby Dataman (Daniel Smith) » 12 Mar 2018 09:48

Dear Dataman users,

New software has just been posted on our software pages for the Dataman 848Pro stand-alone gang programmer.

Version 3.39 features the following amendments:

New Device Support
Many new devices have been added in this revision, please download the full device list to verify your chip is supported: Dataman848ProDeviceList.pdf

Major Changes
Fixed Automatic YES! Wizard Legend position to correctly display (not covering other label)
Fixed bug in checking the programming adapter for MTFC16GJDEC-2M [WFBGA169]
Fixed PG4UW software exception "Access violation" bug related to "Create problem report"
Statistics settings information written to Programmer activity log has small improvements for better reading transparency

Other Changes
ABOV Semiconductor A97C450, If setting FUSE_SUBENA = 1 value, ISEL[1:0] will be set the 11b value automatically
Added adapter: DIL48/BGA152-1 ZIF NAND-1
Added adapter: DIL48/QFN32-1.02 ZIF Kinetis-4
Added adapter: DIL48/QFN48-1.02 ZIF Kinetis-3
Atmel/Microchip AT32UC3A/UC3B/UC3L series, erase function modified
Atmel/Microchip ATxmega128A4U [VFBGA49], flash page size corrected
Atmel/Microchip AVRxmega A4/A4U, modification of least significant bit (bit 0) of fuse byte 4 made possible
Cypress CY8C4xxx, added save device ID
DIL48/QFN28 ZIF-CS STM32-3, support modified
Energy Micro/Silicon Laborat. EFM32G222Fxxx, power-up modify and improving of initial sequence
Fujitsu MB85R4M2T, programming algorithm modified
ISSI IS25LP016D, changed device name and backward project compatibility correction
ISSI IS25LP080D, changed device name and backward project compatibility correction
ISSI IS25LP256D, changed device name and backward project compatibility correction
ISSI IS25WP256DRH [TFBGA24] (Quad I/O), changed device name and backward project compatibility correction
ISSI IS25WP256DRH [TFBGA24], changed device name and backward project compatibility correction
Microchip ATSAME70Q21A, added programming free GPNVM bits
Macronix MX25L51245G, sectors in the erase parameters options have been changed to blocks
Micron MT28FW02GBBA1HPC0 [BGA64], power-up sequence modified
Micron/Numonyx N25Q256A13E [DFN8 8x6], N25Q256A13E [SO16W], N25Q256A13E [TBGA24], POF file format added
Mitsubishi/Renesas M16C/62P family, Boot ROM area start address changed
Mitsubishi/Renesas M30624FGNFP, erase modified
NXP PCF7922, PCF7961, power-up modification
Primarion PX8240HDN [QFN48], PX8746HDN [QFN48], added ID check
Renesas R7F701406, ID authentication mode added
Samsung K8P2716UZC [TSOP56], insertion test modified
Samsung K8P2815UQC [TSOP56], insertion test modified
Samsung K8P5516UZB [TSOP56], insertion test modified
Samsung K8P5616UZB [TSOP56], insertion test modified
Samsung K9K8G08U0E [TSOP48], alternative device ID code added

Bug Fixes
Atmel AT89S52 [PLCC44], insertion test bug fixed
Lattice LFXP3C [TQFP100](VME), LFXP3E [TQFP100](VME), adapter assignment bug fixed
Lattice LIF-MD6000, input file format assignment and verification bug fixed
Lattice LPTM10-12107 [ftBGA208](VME), pgm parameters assignment bug fixed
Lattice LPTM21 (ASC), input file format assignment bug fixed
Macronix MX25xxx [USON8 2x3], pinout bug fixed
Micron MT28EW01GABA1HJS0 [TSOP56], AutoYes! problem fixed
NXP LPC8xx inZIF, programming CRP bug fixed
NXP/Freescale Semic. FS32K144U [LQFP100], programming bug fixed
NXP/Freescale Semic. MC9S12E256/128/64 [LQFP112], unexpected error bug fixed
NXP/Freescale Semic. MCF51JU128 [LQFP64], programming bug fixed
NXP/Freescale Semic. MCF51QM128 [LQFP64], programming bug fixed
NXP/Freescale Semic. MKE02Z4, log record writing fixed
NXP/Freescale Semic. MKE14F512xxx16 [LQFP100], programming bug fixed
STMicroelectronics STM8AF6223P, STM8AF6226T, options bytes bug fixed
STMicroelectronics STM8AF6223P, sole verify of option bytes bug fixed
STMicroelectronics STM8S903xxx, checksum bug fixed

Best regards,

Daniel Smith

Return to “Software Update Notifications”

Who is online

Users browsing this forum: No registered users and 2 guests