Dear Dataman Users,
I ask you to help me with DIP32-PLCC32 ad. p-p description. I've got an S4 programmer and xx29F040xx chips on a PCB, which are not removable. I obviously need to make a cable-like conn. construction to program this PCB with the S4. Please, could you provide me with the description, Or do I have to buy PLCC3232 ?
Thank you in advance
Albert
In-System Programming with S4
-
- Posts: 931
- Joined: 10 Nov 2011 09:51
Re: In-System Programming with S4
Dear Guest,
The DIP32-PLCC32 adaptor socket is wired 1:1
PLCC32 32-Pin DIP
SOCKET > SOCKET
- - 1- - - - - - -1
- - 2- - - - - - -2
/\/\/\/\/\/\/\/\/\/
- -32- - - - - - 32
However, we do not support this method of in system programming. There are too many variables outside of our control. We would recommend that the devices are removed from the PCB and placed directly into the adaptor on the programmers ZIF socket.
Best regards
Neil Parker
Dataman Programmers
The DIP32-PLCC32 adaptor socket is wired 1:1
PLCC32 32-Pin DIP
SOCKET > SOCKET
- - 1- - - - - - -1
- - 2- - - - - - -2
/\/\/\/\/\/\/\/\/\/
- -32- - - - - - 32
However, we do not support this method of in system programming. There are too many variables outside of our control. We would recommend that the devices are removed from the PCB and placed directly into the adaptor on the programmers ZIF socket.
Best regards
Neil Parker
Dataman Programmers
Who is online
Users browsing this forum: No registered users and 19 guests