changed battery and then display " No library Loaded "

[Guest]

Hi,

We have changed the battery and now turn on Dataman S4 and then it display
" No Library Loaded "

We need to burn a Eprom ST M27C256B by Dataman S4 and I would like to consult with you that my procedure as follow is correct or not.
1./ Download the program " 8-Bit EPROM Library " Version 3.0 from S4 Resources
2./ Download and install the software 2.17 in PC
3./ Transfer the Library to Dataman S4 as per the manual.

Please kindly correct me if my understanding is not correct.

Thanks

Goloo

[Dataman (Neil Parker)]

Hello Goloo,

Your procedure is correct. For more detailed information on loading a new library into the S4 from a PC please visit our S4 resources page on our website here.

If you have any problems please let me know.

Best regards,

Neil Parker