Programmer mDOC H3
-
- Posts: 1
- Joined: 28 Aug 2023 10:58
Programmer mDOC H3
Hi all, I am new to this forum, I urgently need a programmer for this type of flash SDED5-004G-AC , any advice is welcome.
-
- Posts: 933
- Joined: 10 Nov 2011 09:51
Re: Programmer mDOC H3
Hello,
We do support the Sandisk/M-Systems MDOC H3 chip on the Dataman-48Pro2C and above models. However, the support is paid, because we spent a lot of time on the support for these chips (more than 6 man-months of development time). The cost for access to the support on top of the price of the programmer and the suitable programming socket is going to be around GBP £1000.
If you did want to go ahead you will be asked to provide the serial number(s) of programmer(s) you want to use for this chip programming.
We have created an application note for this chip programming, it will be provided together with the programming adapter(s).
We can issue the updated software within few days from receiving your order.
If you have any questions or would like to proceed then please do not hesitate to contact me.
Best regards,
Neil Parker
Dataman Programmers
We do support the Sandisk/M-Systems MDOC H3 chip on the Dataman-48Pro2C and above models. However, the support is paid, because we spent a lot of time on the support for these chips (more than 6 man-months of development time). The cost for access to the support on top of the price of the programmer and the suitable programming socket is going to be around GBP £1000.
If you did want to go ahead you will be asked to provide the serial number(s) of programmer(s) you want to use for this chip programming.
We have created an application note for this chip programming, it will be provided together with the programming adapter(s).
We can issue the updated software within few days from receiving your order.
If you have any questions or would like to proceed then please do not hesitate to contact me.
Best regards,
Neil Parker
Dataman Programmers
Who is online
Users browsing this forum: No registered users and 0 guests