
**************** New report. Created: 09.09.2020 09:16:58*****************
Welcome to Dataman programmers control program PG4UW.
L0002: Version 3.34/09.2017.
L0003: 
L0004: Today is 09.09.2020, 09:17:00.
L0005: 
L0006: Processor: Intel (0x0000068A)  Frequency: 797\798.52 MHz
L0007: CID: 800D-E491:00-11-95-20-65-D4:55274-646-8588175-23873:BDAE7F01
L0008: Operating system: Windows XP (v5.1, Build 2600: Service Pack 2).
L0009: Physical RAM memory: 254 MB
L0010: Selected language: English
L0011: 
L0012: 
L0013: >> 09.09.2020, 09:17:01
L0014: Default programmer: Dataman-40Pro.
L0015: Scanning USB port(s) for Dataman-40Pro ................... found at port USB.
L0016: Establishing connection ... done.
L0017: Communication speed rate: reached 100% of maximum in this communication mode.
L0018: Programmer serial number: 578-03481 (MEMPro upgraded to Dataman-40Pro).
L0019: 
L0020: 
L0021: 
L0022: >> 09.09.2020, 09:17:09
L0023: Selected device: STMicroelectronics M2732A.
L0024: Buffer operation "Checksum", time elapsed: 00:00:00.2
L0025: Buffer checksum in range of "Program Memory" [0h..FFFh]: 000FF000h - Byte sum (x8), Straight
L0026: 
L0027: >---------- Begin of options list ---------- (Program startup)
L0028: 
L0029:  |>---------- Device operation options ----------
L0030:  |  ---------- Addresses ----------
L0031:  |  Device start: "0000000000" h
L0032:  |  Device end: "0000000FFF" h
L0033:  |  Buffer start: "0000000000" h
L0034:  |  Split: "None" 
L0035:  |  ---------- Insertion test and/or ID check ----------
L0036:  |  Insertion test: "Enable" 
L0037:  |  ---------- Command execution ----------
L0038:  |  Blank check before programming: "Enable" 
L0039:  |  Verify after reading: "Enable" 
L0040:  |  Verify: "Twice" 
L0041:  |  Verify options: "VCCnom. +/-10%  " 
L0042:  |<---------- Device operation options ----------
L0043: 
L0044: <---------- End of options list ---------- (Program startup)
L0045: 
L0046: Selected device: STMicroelectronics M2732A.
L0047: Buffer checksum in range of "Program Memory" [0h..FFFh]: 000FF000h - Byte sum (x8), Straight
L0048: 
L0049: >> 09.09.2020, 09:17:12
L0050: Buffer checksum type is set to "Byte sum (x8), Straight"
L0051: Buffer block(s) excluded from checksum calculation: Disabled
L0052: 
L0053: >> Log file created at 09.09.2020 09:17:12
L0054: Log file name: C:\Documents and Settings\Jim\Application Data\Dataman\Dataman-Pro\report.rep
L0055: Log file mode: Append
L0056: 
L0057: Buffer "Program Memory" is erased with value FFFFh.
L0058: 
L0059: 
L0060: Buffer "Program Memory" is erased with value FFh.
L0061: >> 09.09.2020, 09:17:42
L0062: Loading file (from "Load file" dialog window): C:\Documents and Settings\Jim\My Documents\Roms\Games\Bally\Fathom\842-01_4.532
L0063: File format selection: automatic
L0064: File format: Binary
L0065: File loading successful. Bytes loaded 4096 (00001000h).
L0066: Buffer operation "Checksum", time elapsed: 00:00:00.1
L0067: Buffer checksum in range of "Program Memory" [0h..FFFh]: 0007D38Eh - Byte sum (x8), Straight
L0068: 
L0069: >> 09.09.2020, 09:17:50
L0070: Opened window "Program?" (parent window "PG4UW v3.34/09.2017 - universal control ...").
L0071: 
L0072: >> 09.09.2020, 09:18:06
L0073: Closed window "Program?" (by pressing "Yes").
L0074: 
L0075: >> 09.09.2020, 09:18:06
L0076: Programming device: STMicroelectronics M2732A.
L0077: Buffer checksum in range of "Program Memory" [0h..FFFh]: 0007D38Eh - Byte sum (x8), Straight
L0078: Device insertion test ...
L0079: Device blank checking ...
L0080: Programming device ...
L0081: Programming device - error!
L0082: ADR=0000h, DO=0Eh, DI=FFh, ST=0000h
L0083: Elapsed time: 0:00:06.1
L0084: Statistics info: Success:0  Failure:1  Other failure:0  Total:1
L0085: 
L0086: >> 09.09.2020, 09:18:25
L0087: Opened window "Program?" (parent window "PG4UW v3.34/09.2017 - universal control ...").
L0088: 
L0089: >> 09.09.2020, 09:18:27
L0090: Closed window "Program?" (by pressing "Yes").
L0091: 
L0092: >> 09.09.2020, 09:18:28
L0093: Programming device: STMicroelectronics M2732A.
L0094: Buffer checksum in range of "Program Memory" [0h..FFFh]: 0007D38Eh - Byte sum (x8), Straight
L0095: Device insertion test ...
L0096: Device blank checking ...
L0097: Programming device ...
L0098: Programming device - error!
L0099: ADR=0000h, DO=0Eh, DI=FFh, ST=0000h
L0100: Elapsed time: 0:00:05.2
L0101: Statistics info: Success:0  Failure:2  Other failure:0  Total:2
L0102: 
L0103: >> 09.09.2020, 09:18:54
L0104: Opened window "Program?" (parent window "PG4UW v3.34/09.2017 - universal control ...").
L0105: 
L0106: >> 09.09.2020, 09:18:56
L0107: Closed window "Program?" (by pressing "Yes").
L0108: 
L0109: >> 09.09.2020, 09:18:56
L0110: Programming device: STMicroelectronics M2732A.
L0111: Buffer checksum in range of "Program Memory" [0h..FFFh]: 0007D38Eh - Byte sum (x8), Straight
L0112: Device insertion test ...
L0113: Device blank checking ...
L0114: Programming device ...
L0115: Programming device - error!
L0116: ADR=0800h, DO=44h, DI=04h, ST=0000h
L0117: Elapsed time: 0:01:48.7
L0118: Statistics info: Success:0  Failure:3  Other failure:0  Total:3
L0119: 
L0120: >> 09.09.2020, 09:21:01
L0121: Opened window "Program?" (parent window "PG4UW v3.34/09.2017 - universal control ...").
L0122: 
L0123: >> 09.09.2020, 09:21:03
L0124: Closed window "Program?" (by pressing "Yes").
L0125: 
L0126: >> 09.09.2020, 09:21:03
L0127: Programming device: STMicroelectronics M2732A.
L0128: Buffer checksum in range of "Program Memory" [0h..FFFh]: 0007D38Eh - Byte sum (x8), Straight
L0129: Device insertion test ...
L0130: Device blank checking ...
L0131: Programming device ...
L0132: Communication error! (V:0/P:00/HW:00/EC:08/) 
L0133: Elapsed time: 0:04:25.8
L0134: Statistics info: Success:0  Failure:3  Other failure:1  Total:4
L0135: 
L0136: >> 09.09.2020, 09:25:34
L0137: Scanning port(s) for Dataman-40Pro ................... found at port USB.
L0138: Establishing connection ... done.
L0139: Communication speed rate: reached 100% of maximum in this communication mode.
L0140: Programmer serial number: 578-03481 (MEMPro upgraded to Dataman-40Pro).
L0141: 
L0142: 
L0143: 
L0144: >> 09.09.2020, 09:25:49
L0145: Opened window "Program?" (parent window "PG4UW v3.34/09.2017 - universal control ...").
L0146: 
L0147: >> 09.09.2020, 09:25:53
L0148: Closed window "Program?" (by pressing "Yes").
L0149: 
L0150: >> 09.09.2020, 09:25:53
L0151: Programming device: STMicroelectronics M2732A.
L0152: Buffer checksum in range of "Program Memory" [0h..FFFh]: 0007D38Eh - Byte sum (x8), Straight
L0153: Device insertion test ...
L0154: Device blank checking ...
L0155: Programming device ...
L0156: Communication error! (V:0/P:00/HW:00/EC:08/) 
L0157: Elapsed time: 0:02:21.5
L0158: Statistics info: Success:0  Failure:3  Other failure:2  Total:5
L0159: 
L0160: >> 09.09.2020, 10:33:13
L0161: Opened window "Program?" (parent window "PG4UW v3.34/09.2017 - universal control ...").
L0162: 
L0163: >> 09.09.2020, 10:33:19
L0164: Closed window "Program?" (by pressing "Yes").
L0165: 
L0166: >> 09.09.2020, 10:33:19
L0167: Programming device: STMicroelectronics M2732A.
L0168: Buffer checksum in range of "Program Memory" [0h..FFFh]: 0007D38Eh - Byte sum (x8), Straight
L0169: This function is not available, if programmer is not found!
L0170: 
L0171: >> 09.09.2020, 10:33:24
L0172: Scanning port(s) for Dataman-40Pro ................... found at port USB.
L0173: Establishing connection ... done.
L0174: Communication speed rate: reached 100% of maximum in this communication mode.
L0175: Programmer serial number: 578-03481 (MEMPro upgraded to Dataman-40Pro).
L0176: 
L0177: 
L0178: 
L0179: >> 09.09.2020, 10:33:32
L0180: Opened window "Program?" (parent window "PG4UW v3.34/09.2017 - universal control ...").
L0181: 
L0182: >> 09.09.2020, 10:33:35
L0183: Closed window "Program?" (by pressing "Yes").
L0184: 
L0185: >> 09.09.2020, 10:33:35
L0186: Programming device: STMicroelectronics M2732A.
L0187: Buffer checksum in range of "Program Memory" [0h..FFFh]: 0007D38Eh - Byte sum (x8), Straight
L0188: Device insertion test ...
L0189: Device blank checking ...
L0190: Programming device ...
L0191: Communication error! (V:0/P:00/HW:00/EC:08/) 
L0192: Elapsed time: 0:00:24.5
L0193: Statistics info: Success:0  Failure:3  Other failure:3  Total:6
L0194: 
L0195: -------------------------------------------------
L0196: -- Creating problem report file                --
L0197: -- Date: 09/09/2020 10:34:31                   --
L0198: -------------------------------------------------
L0199: 
L0200:  |>---------- Device operation options ----------
L0201:  |  ---------- Addresses ----------
L0202:  |  Device start: "0000000000" h
L0203:  |  Device end: "0000000FFF" h
L0204:  |  Buffer start: "0000000000" h
L0205:  |  Split: "None" 
L0206:  |  ---------- Insertion test and/or ID check ----------
L0207:  |  Insertion test: "Enable" 
L0208:  |  ---------- Command execution ----------
L0209:  |  Blank check before programming: "Enable" 
L0210:  |  Verify after reading: "Enable" 
L0211:  |  Verify: "Twice" 
L0212:  |  Verify options: "VCCnom. +/-10%  " 
L0213:  |<---------- Device operation options ----------
L0214: 
L0215: 
L0216:   SN: 578-03481
L0217: PCBV: 5
L0218: PCBR: 0
L0219:   BV: 0001H
L0220:   ID: 0000/0000/0000
L0221: 
L0222: --------- Active device drivers ---------
L0223: #0 System | ACPI\FixedButton | ACPI Fixed Feature Button
L0224: #1 Processor | ACPI\GenuineIntel_-_x86_Family_6_Model_8 | Intel PentiumIII Processor
L0225: #2 System | ACPI\INT0800 | Intel(r) 82802 Firmware Hub Device
L0226: #3 System | ACPI\PNP0100 | System timer
L0227: #4 System | ACPI\PNP0200 | Direct memory access controller
L0228: #5 Keyboard | ACPI\PNP0303 | Standard 101/102-Key or Microsoft Natural PS/2 Keyboard
L0229: #6 Ports | ACPI\PNP0400 | Printer Port
L0230: #7 Ports | ACPI\PNP0501 | Communications Port
L0231: #8 Ports | ACPI\PNP0501 | Communications Port
L0232: #9 fdc | ACPI\PNP0700 | Standard floppy disk controller
L0233: #10 System | ACPI\PNP0800 | System speaker
L0234: #11 System | ACPI\PNP0A03 | PCI bus
L0235: #12 System | ACPI\PNP0B00 | System CMOS/real time clock
L0236: #13 System | ACPI\PNP0C01 | System board
L0237: #14 System | ACPI\PNP0C04 | Numeric data processor
L0238: #15 System | ACPI\PNP0C0E | ACPI Sleep Button
L0239: #16 Mouse | ACPI\PNP0F03 | Microsoft PS/2 Mouse
L0240: #17 System | ACPI_HAL\PNP0C08 | Microsoft ACPI-Compliant System
L0241: #18 Monitor | Monitor\Default_Monitor | Default Monitor
L0242: #19 FloppyDisk | FDC\GENERIC_FLOPPY_DRIVE | Floppy disk drive
L0243: #20 CDROM | IDE\CdRomLG_DVD-ROM_DRD8120B_____________________1.04____ | CD-ROM Drive
L0244: #21 DiskDrive | IDE\DiskIC35L040AVVN07-0________________________VA2OAG0A | Disk drive
L0245: #22 DiskDrive | IDE\DiskWDC_AC24300L____________________________08.09L08 | Disk drive
L0246: #23 System | ISAPNP\ReadDataPort | ISAPNP Read Data Port
L0247: #24 System | LPTENUM\MicrosoftRawPort958A | Printer Port Logical Interface
L0248: #25 Net | PCI\VEN_1186&DEV_1300&SUBSYS_13001186&REV_10 | Realtek RTL8139 Family PCI Fast Ethernet NIC
L0249: #26 System | PCI\VEN_8086&DEV_1130&SUBSYS_00000000&REV_02 | Intel(R) 82815 Processor to I/O Controller - 1130
L0250: #27 Display | PCI\VEN_8086&DEV_1132&SUBSYS_45328086&REV_02 | Intel(R) 82815 Graphics Controller (Microsoft Corporation)
L0251: #28 System | PCI\VEN_8086&DEV_2440&SUBSYS_00000000&REV_02 | Intel(R) 82801BA LPC Interface Controller - 2440
L0252: #29 USB | PCI\VEN_8086&DEV_2442&SUBSYS_45328086&REV_02 | Intel(r) 82801BA/BAM USB Universal Host Controller - 2442
L0253: #30 System | PCI\VEN_8086&DEV_2443&SUBSYS_45328086&REV_02 | Intel(R) 82801BA/BAM SMBus Controller - 2443
L0254: #31 USB | PCI\VEN_8086&DEV_2444&SUBSYS_45328086&REV_02 | Intel(r) 82801BA/BAM USB Universal Host Controller - 2444
L0255: #32 MEDIA | PCI\VEN_8086&DEV_2445&SUBSYS_46568086&REV_02 | Intel(r) 82801BA/BAM AC'97 Audio Controller
L0256: #33 Net | PCI\VEN_8086&DEV_2449&SUBSYS_30138086&REV_01 | Intel(R) PRO/100 VE Network Connection
L0257: #34 hdc | PCI\VEN_8086&DEV_244B&SUBSYS_45328086&REV_02 | Intel(r) 82801BA Bus Master IDE Controller
L0258: #35 System | PCI\VEN_8086&DEV_244E&SUBSYS_00000000&REV_02 | Intel(R) 82801BA/CA PCI Bridge - 244E
L0259: #36 hdc | Intel-244b | Primary IDE Channel
L0260: #37 hdc | Intel-244b | Secondary IDE Channel
L0261: #38 Computer | acpipic_up | Advanced Configuration and Power Interface (ACPI) PC
L0262: #39 System | ROOT\DMIO | Logical Disk Manager
L0263: #40 System | ROOT\FTDISK | Volume Manager
L0264: #41 Jungo | *WINDRVR6 | WinDriver
L0265: #42 LegacyDriver |  | AFD Networking Support Environment
L0266: #43 LegacyDriver |  | Beep
L0267: #44 LegacyDriver |  | dmboot
L0268: #45 LegacyDriver |  | dmload
L0269: #46 LegacyDriver |  | Fips
L0270: #47 LegacyDriver |  | Generic Packet Classifier
L0271: #48 LegacyDriver |  | hotcore2
L0272: #49 LegacyDriver |  | HTTP
L0273: #50 LegacyDriver |  | IP Network Address Translator
L0274: #51 LegacyDriver |  | IPSEC driver
L0275: #52 LegacyDriver |  | ksecdd
L0276: #53 LegacyDriver |  | mnmdd
L0277: #54 LegacyDriver |  | mountmgr
L0278: #55 LegacyDriver |  | NDIS System Driver
L0279: #56 LegacyDriver |  | Remote Access NDIS TAPI Driver
L0280: #57 LegacyDriver |  | NDIS Usermode I/O Protocol
L0281: #58 LegacyDriver |  | NDProxy
L0282: #59 LegacyDriver |  | NetBios over Tcpip
L0283: #60 LegacyDriver |  | Null
L0284: #61 LegacyDriver |  | PartMgr
L0285: #62 LegacyDriver |  | ParVdm
L0286: #63 LegacyDriver |  | Remote Access Auto Connection Driver
L0287: #64 LegacyDriver |  | RDPCDD
L0288: #65 LegacyDriver |  | RDPWD
L0289: #66 LegacyDriver |  | TCP/IP Protocol Driver
L0290: #67 LegacyDriver |  | TDTCP
L0291: #68 LegacyDriver |  | VgaSave
L0292: #69 LegacyDriver |  | VolSnap
L0293: #70 LegacyDriver |  | Remote Access IP ARP Driver
L0294: #71 LegacyDriver |  | Kernel Mode Driver Frameworks service
L0295: #72 MEDIA | MS_MMACM | Audio Codecs
L0296: #73 MEDIA | MS_MMDRV | Legacy Audio Drivers
L0297: #74 MEDIA | MS_MMMCI | Media Control Devices
L0298: #75 MEDIA | MS_MMVCD | Legacy Video Capture Devices
L0299: #76 MEDIA | MS_MMVID | Video Codecs
L0300: #77 Net | ms_l2tpminiport | WAN Miniport (L2TP)
L0301: #78 Net | ms_ndiswanip | WAN Miniport (IP)
L0302: #79 Net | ms_pppoeminiport | WAN Miniport (PPPOE)
L0303: #80 Net | ms_pptpminiport | WAN Miniport (PPTP)
L0304: #81 Net | ms_pschedmp | Packet Scheduler Miniport
L0305: #82 Net | ms_pschedmp | Packet Scheduler Miniport
L0306: #83 Net | ms_pschedmp | Packet Scheduler Miniport
L0307: #84 Net | ms_ptiminiport | Direct Parallel
L0308: #85 System | ROOT\RDPDR | Terminal Server Device Redirector
L0309: #86 System | ROOT\RDP_KBD | Terminal Server Keyboard Driver
L0310: #87 System | ROOT\RDP_MOU | Terminal Server Mouse Driver
L0311: #88 System | root\swenum | Plug and Play Software Device Enumerator
L0312: #89 System | root\update | Microcode Update Device
L0313: #90 System | root\mssmbios | Microsoft System Management BIOS Driver
L0314: #91 Volume | STORAGE\Volume | Generic volume
L0315: #92 Volume | STORAGE\Volume | Generic volume
L0316: #93 MEDIA | SW\{a7c7a5b0-5af3-11d1-9ced-00a024bf0407} | Microsoft Kernel System Audio Device
L0317: #94 MEDIA | SW\{cd171de3-69e5-11d2-b56d-0000f8754380} | Microsoft WINMM WDM Audio Compatibility Driver
L0318: #95 USB | USB\ROOT_HUB&VID8086&PID2444&REV0002 | USB Root Hub
L0319: #96 USB | USB\ROOT_HUB&VID8086&PID2442&REV0002 | USB Root Hub
L0320: #97 USB | USB\Vid_04b4&Pid_8613&Rev_0001 | GQ USB Programmer
L0321: #98 DevPgmUSB | USB\Vid_1393&Pid_0579&Rev_8004 | DATAMAN-40PRO, Universal 40-pindrive Programmer
