Hello Midge19641, You can use the Pg4uw software and load your file using the automatic file recognition. Our software will tell you what format the contents of the file are in. The file extension can be misleading. If I rename boot.hex file to boot.bin, the content will still be in HEX format. Impl...

Hello IntegraUser, .bit file is an internal Xilinx file for iMPACT which creates MCS file, which is (Intel HEX format) file according to the selected CFG device. If you receive an error when creating MCS file from the .bit file, then this means the Stapl file will also be defective. Have you discuss...

Hello Midge19641, I'm not familiar with the SAF file format. Typically, we require files in the Motorola HEX format, indicated by the file extension *.S19, to process data. It's difficult to respond to your inquiry without knowing the format of the data in your files, specifically boot.hex, eeprom.h...

Hello,

Are you asking where the chip must be placed in the ZIF socket, or something else? Please specify exactly what you need.

Best regards,

Neil Parker
Dataman Programmers

Hello pdelectronics, The Dataman-40Pro only has the capability to test static RAM devices: 6116 .. 624000 You would need to consider the Dataman-48Pro2C or above models in order to gain the ability to test other devices types: TTL type: 54,74 S/LS/ALS/H/HC/HCT series CMOS type: 4000, 4500 series Sta...

Hello Arkadiusz, I have checked the situation again with our engineers and unfortunately it doesn't look like we will be able to successfully implement programming support for this device. The engineer who was familiar with EPROM-based (older) Motorola devices left the company and assigning this wor...

Hello Andrew,

Did you see the following information we provide in the Device info section of our software for this device:

Best regards,

Neil Parker
Dataman Programmers Ltd

I have not used that command on the S4. Using the Windows S4 driver the commands that I use to send a library to the S4 and load it into the TPA are from the Transfer menu > Download Library. This asks for the location of the library .hex and send it to the S4. After reset and power off/on the new l...

Hello adriangodwin, If you are trying to load a new library into the S4 then FUNC RCVE is not the right command. There is an application note on our website here which details the steps to load a new library from the PC to the S4. If you have any further questions, please contact me. Best regards, N...

Hello adriangodwin,

The S4 will only detect that the charger is connected if it is supplied with A/C current, as with the original S4 charger.

If there is anything else I can help you with, please let me know.

Best regards,


Neil Parker
Dataman Programmers