Search found 931 matches
- 02 May 2023 08:52
- Forum: Devices and Programming
- Topic: Programming MC912DG128A
- Replies: 4
- Views: 33312
Re: Programming MC912DG128A
Hello Midge19641, You can use the Pg4uw software and load your file using the automatic file recognition. Our software will tell you what format the contents of the file are in. The file extension can be misleading. If I rename boot.hex file to boot.bin, the content will still be in HEX format. Impl...
- 25 Apr 2023 15:58
- Forum: Dataman 48Pro2
- Topic: XC1701LPC20I and MCS file
- Replies: 1
- Views: 1359
Re: XC1701LPC20I and MCS file
Hello IntegraUser, .bit file is an internal Xilinx file for iMPACT which creates MCS file, which is (Intel HEX format) file according to the selected CFG device. If you receive an error when creating MCS file from the .bit file, then this means the Stapl file will also be defective. Have you discuss...
- 19 Apr 2023 14:12
- Forum: Devices and Programming
- Topic: Programming MC912DG128A
- Replies: 4
- Views: 33312
Re: Programming MC912DG128A
Hello Midge19641, I'm not familiar with the SAF file format. Typically, we require files in the Motorola HEX format, indicated by the file extension *.S19, to process data. It's difficult to respond to your inquiry without knowing the format of the data in your files, specifically boot.hex, eeprom.h...
- 18 Apr 2023 16:18
- Forum: Dataman S4
- Topic: 24c04 eeprom
- Replies: 7
- Views: 4912
Re: 24c04 eeprom
Hello,
Are you asking where the chip must be placed in the ZIF socket, or something else? Please specify exactly what you need.
Best regards,
Neil Parker
Dataman Programmers
Are you asking where the chip must be placed in the ZIF socket, or something else? Please specify exactly what you need.
Best regards,
Neil Parker
Dataman Programmers
- 18 Apr 2023 08:05
- Forum: Dataman 40Pro
- Topic: IC test option disabled
- Replies: 1
- Views: 1431
Re: IC test option disabled
Hello pdelectronics, The Dataman-40Pro only has the capability to test static RAM devices: 6116 .. 624000 You would need to consider the Dataman-48Pro2C or above models in order to gain the ability to test other devices types: TTL type: 54,74 S/LS/ALS/H/HC/HCT series CMOS type: 4000, 4500 series Sta...
- 11 Apr 2023 10:29
- Forum: Devices and Programming
- Topic: Motorola MC68HC805P18 mask h44h
- Replies: 3
- Views: 6698
Re: Motorola MC68HC805P18 mask h44h
Hello Arkadiusz, I have checked the situation again with our engineers and unfortunately it doesn't look like we will be able to successfully implement programming support for this device. The engineer who was familiar with EPROM-based (older) Motorola devices left the company and assigning this wor...
- 27 Mar 2023 08:11
- Forum: Dataman 48Pro2
- Topic: MC68705P3
- Replies: 3
- Views: 2246
Re: MC68705P3
Hello Andrew,
Did you see the following information we provide in the Device info section of our software for this device:
Best regards,
Neil Parker
Dataman Programmers Ltd
Did you see the following information we provide in the Device info section of our software for this device:
Best regards,
Neil Parker
Dataman Programmers Ltd
- 23 Jan 2023 16:29
- Forum: Dataman S4
- Topic: S4 receive library
- Replies: 3
- Views: 2866
Re: S4 receive library
I have not used that command on the S4. Using the Windows S4 driver the commands that I use to send a library to the S4 and load it into the TPA are from the Transfer menu > Download Library. This asks for the location of the library .hex and send it to the S4. After reset and power off/on the new l...
- 23 Jan 2023 09:51
- Forum: Dataman S4
- Topic: S4 receive library
- Replies: 3
- Views: 2866
Re: S4 receive library
Hello adriangodwin, If you are trying to load a new library into the S4 then FUNC RCVE is not the right command. There is an application note on our website here which details the steps to load a new library from the PC to the S4. If you have any further questions, please contact me. Best regards, N...
- 23 Jan 2023 09:47
- Forum: Dataman S4
- Topic: Charging from a bench supply
- Replies: 2
- Views: 2490
Re: Charging from a bench supply
Hello adriangodwin,
The S4 will only detect that the charger is connected if it is supplied with A/C current, as with the original S4 charger.
If there is anything else I can help you with, please let me know.
Best regards,
Neil Parker
Dataman Programmers
The S4 will only detect that the charger is connected if it is supplied with A/C current, as with the original S4 charger.
If there is anything else I can help you with, please let me know.
Best regards,
Neil Parker
Dataman Programmers