help!!

Topics related to the Dataman 48, 48LV, 48XP and 48UXP
Guest
Posts: 723
Joined: 09 Nov 2011 17:16

help!!

Postby Guest » 11 Nov 2011 12:12

GOOD DAY!
help please pinout adapter SDP-I512P3-56TS - need to read and write chip PC28F128P33T INTEL (EBGA64). THANK YOU
[email protected]

10wsw

Dataman (Neil Parker)
Posts: 931
Joined: 10 Nov 2011 09:51

Re: help!!

Postby Dataman (Neil Parker) » 11 Nov 2011 12:12

Hello 10wsw,

Thank you for your post.

The part number you have provided is not complete and as it is covers about 25 different devices.

I believe that the full part number should look similar to this: RC/PC28F128P33B

Please check and provide me with the full part number of your device and I will try to help.

Regards,

Neil Parker
Dataman Programmers

Guest
Posts: 723
Joined: 09 Nov 2011 17:16

Re: help!!

Postby Guest » 11 Nov 2011 12:13

Thank you for having responded
PC28F128P33T Intel EBGA 64pin.

and another question is it possible to read and program the chip MD2811-D32-V3 (M-systems tsop48) ??

10wsw

Dataman (Neil Parker)
Posts: 931
Joined: 10 Nov 2011 09:51

Re: help!!

Postby Dataman (Neil Parker) » 11 Nov 2011 12:13

Hello 10wsw,

Since updating your original post I can see that we are now talking about the Intel PC28F128P33T device in the EBGA 64ball package.

This device is unfortunately not supported on the Dataman-48XP/UXP programmer in the EBGA 64ball package.

I can offer you a solution to programming the Intel PC28F128P33T device in the EBGA 64ball package. I would recommend the Dataman-48Pro2 and the adaptor combination BGA-Bottom-31 + BGA-Top-121 ZIF-CS.

I believe the Dataman 48Pro2 to be the best in its class on the market worldwide at the moment. The Dataman 48Pro2 offers super fast programming speeds and includes advanced features such as ISP capability, USB 2.0 interface and comprehensive software compatible with Windows 98, ME, NT, 2000, 2003, XP, Vista and 7 (32-bit & 64-bit). The Dataman 48Pro2 supports over 64,950 devices which is updated every 3 - 4 weeks with each update adding 200 - 300 new chips. Support can be added for missing devices quickly and typically free of charge.

The programmer comes as standard with our 3 year parts and labour warranty, free life-time technical support and software updates. More information can be found on our website.

We provide a 30 day money back guarantee on all our programmers and this programmer comes with a 3 year warranty as standard.

We may also be able to offer you a trade in discount on the 48Pro2 if you were to trade in your current programmer. If this is of interest to you please contact me directly using [email protected] for further information.

If you have any further queries or would like to get a quotation or order this programmer, please feel free to contact me.

Regards

Neil Parker
Dataman Programmers

Guest
Posts: 723
Joined: 09 Nov 2011 17:16

Re: help!!

Postby Guest » 11 Nov 2011 12:13

hi Dataman!!
As I understood from your answer to me besides the fact that I bought another 48XP/UXP - 48Pro2 buy - I'm not a millionaire
I need to be considered one chip to another record - solder thin wires to the chip (but it does require an adapter pinout SDP-I512P3-56TS )

10wsw

Dataman (Neil Parker)
Posts: 931
Joined: 10 Nov 2011 09:51

Re: help!!

Postby Dataman (Neil Parker) » 11 Nov 2011 12:14

Hello 10wsw,

In general we do not give our the pin swap tabled for our adaptors but in this case we will make an exception.

Pinout details of the SDP-I512P3-56TS adaptor have been sent in a PM to you.

I hope this helps. Please note that we cannot offer any further support for this case. Good luck.

Regards,

Neil Parker
Dataman Programmers

Guest
Posts: 723
Joined: 09 Nov 2011 17:16

Re: help!!

Postby Guest » 11 Nov 2011 12:14

THANK YOU !!
it worked out! though it required patience .

10wsw


Return to “Dataman 48, 48LV, 48XP and 48UXP”

Who is online

Users browsing this forum: No registered users and 3 guests