xc9536xl

Topics related to the Dataman 48, 48LV, 48XP and 48UXP
chrisautosound
Posts: 4
Joined: 27 Jul 2013 19:02

xc9536xl

Postby chrisautosound » 27 Jul 2013 19:25

http://www.drivestar.biz/adapter-wlpl44 ... -1420.html

specified for the XC9536 etc


using the WL-PL44-U001 dip-44 to plcc44 adaptor I get

Device code unmatched !


Ok so i bought the adaptor online and it looks great.

Do you have a list showing how the pins should be mapped so I can verify the adaptor is right?

Dataman (Neil Parker)
Posts: 931
Joined: 10 Nov 2011 09:51

Re: xc9536xl

Postby Dataman (Neil Parker) » 29 Jul 2013 08:00

Hello chrisautosound,

The adaptor connection tables for the most popular sockets can be found on our website here: http://www.dataman.com/dataman-48xp48uxp-resources

If you have any further questions, please let me know.

Best regards,

Neil Parker
Dataman Programmers

chrisautosound
Posts: 4
Joined: 27 Jul 2013 19:02

Re: xc9536xl

Postby chrisautosound » 31 Jul 2013 22:48

thanks for the tip, I ohmed out the adaptor and it is straight 1 to 1, UNIV-44

but same failed result for all actions

read
blank check
program etc

Device code unmatched !

Dataman (Neil Parker)
Posts: 931
Joined: 10 Nov 2011 09:51

Re: xc9536xl

Postby Dataman (Neil Parker) » 01 Aug 2013 08:03

Hello chrisautosound,

Did the error message in the log window specify the expected Device ID and the ID as read from the device?

If you can provide all the codes from the top of the device we can check with Xilinx to see if they have changed the Device ID value on later devices.

If you have any further questions, please let me know.

Best regards,

Neil Parker
Dataman Programmers

chrisautosound
Posts: 4
Joined: 27 Jul 2013 19:02

Re: xc9536xl

Postby chrisautosound » 01 Aug 2013 20:42

Did the error message in the log window specify the expected Device ID and the ID as read from the device?

No, it does not. The only message is Device code unmatched !


If you can provide all the codes from the top of the device we can check with Xilinx to see if they have changed the Device ID value on later devices.

there are no bottom markings
top markings
XC9536XL
PC44CMN0401
F1291492A
10C


Chips supplied by Harman. Insert in socket.
Then select the IC, then load the 770498.jed file supplied by Harman.

blank test fails Device code unmatched !
program fails Device code unmatched !

so far I have used the succesfully use the 48LV for 27C eeproms and 18vc8 devices.

Thanks for the help, let me know what you find. chris

chrisautosound
Posts: 4
Joined: 27 Jul 2013 19:02

Re: xc9536xl

Postby chrisautosound » 08 Aug 2013 20:30

HMM I dont think it is the PLCC-> DIP adaptor.

I ordered a PLCC44 device for checking the adaptor and my 48LV

With the AT271024 in place there are no errors and the blank check works.


any news on your end?


Chris

Dataman (Neil Parker)
Posts: 931
Joined: 10 Nov 2011 09:51

Re: xc9536xl

Postby Dataman (Neil Parker) » 13 Aug 2013 09:27

Hello Chris,

I am afraid that we cannot offer a solution for this device. It may be a new version of the chip which is incompatible with the existing algorithm.
We have contacted Xilinx and requested updated information on the chip but we were informed that it is an old algorithm and chip and that Xilinx do not have the resources to continue supporting it any more.

I can only recommend that you contact Xilinx and ask for their recommended programming solution.

I regret that we could not be of more help on this occasion.

Best regards,

Neil Parker
Dataman Programmers


Return to “Dataman 48, 48LV, 48XP and 48UXP”

Who is online

Users browsing this forum: No registered users and 6 guests