New software - Version 3.61

Software update notifications
Dataman (Daniel Smith)
Posts: 2027
Joined: 09 Nov 2011 14:36

New software - Version 3.61

Postby Dataman (Daniel Smith) » 14 Sep 2020 15:34

Dear Dataman users,

New software has just been posted on our software pages for the Dataman 40Pro universal ISP programmer.

Version 3.61 features the following amendments:

New Device Support
Many new devices have been added in this revision, please download the full device list to verify your chip is supported: Dataman40ProDeviceList.pdf

Major Changes
Fixed bug in installation PG4UW SW for Windows XP introduced in SW 3.60
Fixed Load file exception handling to correctly set Load file error result
Fixed PG4UW command line parameter "/writebuffer:...". The command is now correctly processed, not suppressed (ignored)
Installator of PG4UW is now fully based on unicode texts

Other Changes
Added adapter: DIL28W/SSOP28 ZIF 200mil (id)
AMD AM27C010, programming algorithm modified
Atmel ATSHA204A, programming algorithm modified
Atmel/Microchip ATmega16/32/64/128, ATmega164/324/644, ATmega169/329/649, power on sequence modified
Cypress CY8C3xxx and CY8C5xxx, added store silicon ID
Cypress S25FSxxxS family, part numbering correction
Dosilicon DS35Q2GB [WSON8], DS35M2GB [WSON8], DSND8G08S3N [FBGA63], ID check modified (manufacturer has changed device ID)
ESMT EN25Q80C(2A) [SOP8-200] (QuadSPI), added Verifying Status Register
Fudan Microelect. FM25F005 [TSSOP8], power-up modified
Intel/Altera MAX II, improving of checksum calculation, enabling of checksum options dialogue
ITE Tech. Inc. IT8851FN, power on sequence modified
Macronix MX25L12835F [SOP16] (Quad I/O), added DIL16W/SOIC16 ZIF 300mil SFlash-1b
Macronix MX25U12832F, Device info correction
Microchip 93AA46AE48, General info in CTRL+F1 window modified
Microchip PIC12F675, programming procedure improved
Microchip PIC32MZ Family, power-up procedure improved
Microchip/Atmel ATSAMD21 series, changed ID codes of some devices according the newest errata
Micron N25Q128A13E12 [TBGA24] (Quad I/O), Alt+S view/edit dialogue improved, added recovery sequence to power-up
Micronas HAL805 [TO-92UT], added OFFSET and FOSCAD to ALT+S read-only section
Micronas HAL805 [TO-92UT], added register conversions into the ALT+S window
NXP/Freescale Semic. MC9S12ZVMCxx, S912ZVMCxx, device ID modified
NXP LPC54608, programming procedure improved
Renesas R7F701441, programming procedure improved
Renesas/Mitsubishi M30622F8PGP, reading modified
Silicon Laborat. EZR32HGxxx, added new option for programming the whole Lock Bits Page
SK Hynix H26M41204HPR [FBGA153], stability improved
Spansion S25FSxxxS family, part numbering correction
STMicroelectronics STM32F40x and STM32F41x, Device info modified for device in LQFP100 package (rev=A and rev>A)
Telink Semicond. TLSR8267F512ET32, operation parameters modified
TI (TMS) TIBPAL16xx-10, improving of overcurrent protection system, improving of programming

Bug Fixes
Atmel/Microchip ATSAMD21J18A, device ID check error fixed
ESMT EN25Q80C(2A) [SOP8-200] (QuadSPI), Status Register settings bug fixed
Fujitsu MB85RS2MT [SOP8], device package dimension fixed
Giantec Semicond. GT25C128A, ID check error bug fixed
GigaDevice GD32E103xxx, false "Blank checking Main Memory - error!" fixed (a bug in auxiliary bootloader)
Intersil/Zilker Labs ZL2106, verification bug fixed
Microchip PIC24FJ64/128/256GA702/704/705, load of hex files bug fixed
Macronix MX25U51245G [WSON8 8x6] (Quad I/O), Programming registers - error! fixed
Macronix MX30LFxG28AD, randomizer feature processing fixed (error in default state evaluation with "Randomizer feature error! Once set, Randomizer feature state cannot be changed." message yet before unused blank device programming)
NXP/Philips PCF85103C-2, programming procedure bug fixed
Serial NAND flash, hardware loop-up table mode fixed (LBA and PBA blocks both were considered invalid on device reprogramming)
TI (TMS) MSP430F47126, device ID check error fixed
TI (TMS) MSP430F5234, MSP430F5244, MSP430F5237, MSP430F5247, device size fixed
TI (TMS) TIBPAL16xx-10, blank check test bug fixed, programming action bug fixed

Best regards,

Daniel Smith

Return to “Software Update Notifications”

Who is online

Users browsing this forum: No registered users and 1 guest