New software - Version 3.62
Posted: 20 Oct 2020 15:35
Dear Dataman users,
New software has just been posted on our software pages for the Dataman 48Pro2 super fast universal ISP programmer.
Version 3.62 features the following amendments:
New Device Support
Many new devices have been added in this revision, please download the full device list to verify your chip is supported: Dataman48Pro2DeviceList.pdf
Major Changes
Recently loaded file name and file information is now preserved after selecting of new device by any of menu commands "Device | Select ..."
Other Changes
Added adapter: DIL48/module ZIF-CS Murata WiFi-1
Added adapter: DIL48/QFN32-1.02 ZIF M4xx-1
Added adapter: DIL48/QFN40-2.02 ZIF IT-1
Added adapter: DIL48/QFN48-1.02 ZIF TLSR-2
Added adapter: DIL48/QFP48-1.02 ZIF M4xx-1
Added adapter: DIL48/QFP64-1.01 ZIF M4xx-1
Added adapter: DIL48/QFP128-1.01 ZIF ITE-2
Added adapter: DIL48/QFP128-1.01 ZIF M4xx-1
Added adapter: DIL48/QFP144-1.02 ZIF-CS R5F-5
Added adapter: DIL48/QFP144-1.02 ZIF M4xx-1
Added adapter: DIL48/TSSOP20-170 ZIF MS51-1
Altera EPCE16 [PQFP100], stability of reading/verifying device improved
FORESEE FS35ND01G-S1Y2QWFI000 [WSON8], FS35ND02G-S3Y2QWFI000 [WSON8], FS35ND04G-S2Y2QWFI000 [WSON8], added OTP area support, removed Block Protection support (under the direction of the devices manufacturer)
Intel/Altera MAX V, improving of checksum calculation, enabling of checksum options dialogue
Intel/Altera MAX 10, improving of checksum displaying
ITE Tech. Inc. IT8851FN, enter to debug mode modified
Macronix MX35LF4GE4AD [WSON8], SPI NOR compatibility features support added
Macronix MX77L12850F [SOP8-200] (Quad I/O) (woRPMC), changed device name and backward project compatibility
Macronix MX77L12850F [WSON8 6x5] (Quad I/O) (woRPMC), changed device name and backward project compatibility
NEC/Renesas uPD70F3376A, initialization procedure improved
NEC/Renesas uPD78F0513A (ISP-UART), Baud Rate set for communication improved
NXP MK80FN256xDC15 programming modified
Renesas R7F701441, programming algorithm modified
TI(TMS) TMS320F28075, improving of programming procedure
Bug Fixes
Atmel/Microchip ATSAML21G18B [QFN48], ID check error bug fixed
eMMC devices, Authentication failure bug fixed
GigaDevice GD25LD40C [USON8 3x2], Automatic YES bug fixed
Infineon XMC1202-xxxxx0032AB [TSSOP16], XMC1302-xxxxx0032AB [TSSOP16] - ID check error bug fixed
Macronix MX25UW51245GXD: Configuration Register2 verification bug fixed
Macronix MX25UW51245GXD: Programming error after Erase fixed
Renesas R5Fxxx (ISP) devices, Bad target system supply voltage value bug fixed
STMicroelectronics STM8AF62xx, block size bug fixed
STMicroelectronics STM8AF6226T, programming/verifying option bytes bug fixed
uPD78F05xx ISP devices; Oscillator frequency value not saved in the project bug fixed
Winbond/Nuvoton W78E365A [PQFP44], Insertion test bug fixed
Best regards,
Daniel Smith
New software has just been posted on our software pages for the Dataman 48Pro2 super fast universal ISP programmer.
Version 3.62 features the following amendments:
New Device Support
Many new devices have been added in this revision, please download the full device list to verify your chip is supported: Dataman48Pro2DeviceList.pdf
Major Changes
Recently loaded file name and file information is now preserved after selecting of new device by any of menu commands "Device | Select ..."
Other Changes
Added adapter: DIL48/module ZIF-CS Murata WiFi-1
Added adapter: DIL48/QFN32-1.02 ZIF M4xx-1
Added adapter: DIL48/QFN40-2.02 ZIF IT-1
Added adapter: DIL48/QFN48-1.02 ZIF TLSR-2
Added adapter: DIL48/QFP48-1.02 ZIF M4xx-1
Added adapter: DIL48/QFP64-1.01 ZIF M4xx-1
Added adapter: DIL48/QFP128-1.01 ZIF ITE-2
Added adapter: DIL48/QFP128-1.01 ZIF M4xx-1
Added adapter: DIL48/QFP144-1.02 ZIF-CS R5F-5
Added adapter: DIL48/QFP144-1.02 ZIF M4xx-1
Added adapter: DIL48/TSSOP20-170 ZIF MS51-1
Altera EPCE16 [PQFP100], stability of reading/verifying device improved
FORESEE FS35ND01G-S1Y2QWFI000 [WSON8], FS35ND02G-S3Y2QWFI000 [WSON8], FS35ND04G-S2Y2QWFI000 [WSON8], added OTP area support, removed Block Protection support (under the direction of the devices manufacturer)
Intel/Altera MAX V, improving of checksum calculation, enabling of checksum options dialogue
Intel/Altera MAX 10, improving of checksum displaying
ITE Tech. Inc. IT8851FN, enter to debug mode modified
Macronix MX35LF4GE4AD [WSON8], SPI NOR compatibility features support added
Macronix MX77L12850F [SOP8-200] (Quad I/O) (woRPMC), changed device name and backward project compatibility
Macronix MX77L12850F [WSON8 6x5] (Quad I/O) (woRPMC), changed device name and backward project compatibility
NEC/Renesas uPD70F3376A, initialization procedure improved
NEC/Renesas uPD78F0513A (ISP-UART), Baud Rate set for communication improved
NXP MK80FN256xDC15 programming modified
Renesas R7F701441, programming algorithm modified
TI(TMS) TMS320F28075, improving of programming procedure
Bug Fixes
Atmel/Microchip ATSAML21G18B [QFN48], ID check error bug fixed
eMMC devices, Authentication failure bug fixed
GigaDevice GD25LD40C [USON8 3x2], Automatic YES bug fixed
Infineon XMC1202-xxxxx0032AB [TSSOP16], XMC1302-xxxxx0032AB [TSSOP16] - ID check error bug fixed
Macronix MX25UW51245GXD: Configuration Register2 verification bug fixed
Macronix MX25UW51245GXD: Programming error after Erase fixed
Renesas R5Fxxx (ISP) devices, Bad target system supply voltage value bug fixed
STMicroelectronics STM8AF62xx, block size bug fixed
STMicroelectronics STM8AF6226T, programming/verifying option bytes bug fixed
uPD78F05xx ISP devices; Oscillator frequency value not saved in the project bug fixed
Winbond/Nuvoton W78E365A [PQFP44], Insertion test bug fixed
Best regards,
Daniel Smith