New software - Version 3.28

Software update notifications
Dataman (Daniel Smith)
Posts: 2263
Joined: 09 Nov 2011 14:36

New software - Version 3.28

Postby Dataman (Daniel Smith) » 13 Dec 2016 15:52

Dear Dataman users,

New software has just been posted on our software pages for the Dataman 848Pro2 super fast stand-alone gang programmer.

Version 3.28 features the following amendments:

New Device Support
Many new devices have been added in this revision, please download the full device list to verify your chip is supported: Dataman848Pro2DeviceList.pdf

Major Changes
Added buttons for operation Load/Save binary files directly from dialog View/Edit buffer for main (the first) buffer in the same way as for secondary buffers
Added information (name) about target buffer operation in buffer data processing dialogs "Erase buffer block", "Move buffer block", "Copy buffer block", ...
Fixed bug in SACU P1/08 communication protocol
Fixed default blank value in dialog "Erase buffer block...", to correctly display default blank value for all buffers available (each buffer has its own blank value)
Fixed problem with View/Edit buffer dialog, that could display buffer in x1 mode for x8/x16 view mode devices, if the recent device was selected after x1 device
Improved BGA adapters checking
Internal improvements in PG4UWMC

Other Changes
Added adapter: DIL48/VQFN132 ZIF-CS MV250
Added adapter: DIL8/BGA12-3 ZIF-CS SFlash-1
Atmel AT45DBxxxD, added Page Size verification
Atmel ATmega168/328 (ISP-SPI), device handling improved
Atmel ATmega32U4 (ISP-SPI), device handling improved
Atmel ATmega8/48/88/168/328/P (ISP-SPI), programming procedure improved
Atmel ATtiny45/85/44/84 (ISP-SPI), device handling improved
BGA-Top-410 ZIF, adapter information improved
eMMC devices, canceled option 'Device ID check error terminates the operation'
eMMC devices, erase operation improved
eMMC devices, Preview of the partition table, improved
ESMT FM6BD2G2GA [BGA162] (FOX-03), Access method options enabled
ESMT FM6BD2G2GA [BGA162] (FOX-03), headers verify errors listing added
Freescale Semic. MC3xPF3000, OTP configuration warning added
Freescale Semic. MMPF0100NPAEP [QFN56], OTP configuration warning added
Freescale Semic. MMPF0200, OTP configuration warning added
Fujitsu MB7114H, programming modified
Infineon/Primarion PXE1610C, PXM1330C, reading and programming procedure improved
ISSI IS25LQ020B [UDFN8 2x3], changed device name and backward project compatibility correction
Lattice MachXO2, algorithm changes according to actual pgm spec
Macronix MX66U51235F [WSON8 8x6] (Quad I/O), program/erase operations improved
Maxim MAX34463, Config file - error - note to log file improvement
Maxim MAX34463, device info and checksum options modified
Microchip PIC10F/LF322 (ISP-ext.VDD), disabled check of configuration settings
Micron/Numonyx/Intel JS28F00AM29EWH [TSOP56], power-up sequence and programming procedure modified
Micron MT25QU128ABA8E12 [TBGA24] (Quad I/O), improving of reading stability
Nec/Renesas uPD78F011x [TQFP44], synchronization procedure improved
Silicon Laborat. SiM3x devices, power-up sequence modified
STMicroelectronics STM8L151C6T, reading procedure improved
Xilinx XC3S200AN and XC3S400AN, added Page Size verification

Bug Fixes
Analog Devices ADUC7061xxxx32, adapter bug fixed
Atmel ATmega48PB/88PB/168PB/328PB, blank check error bug fixed
Atmel ATxmegaB/C/E series, fixed value of bit 0 in fuse byte 4 corrected to 1.
Cypress CYBL10161-56LQXI (ISP), reading and programming bug fixed
Energy Micro/Silicon Laborat. EFM32G880F64 (ISP), programming "Lock the device for debug access" bug fixed
Freescale Semic. MC9S08AC60 [QFP64], Unexpected error fixed
Freescale Semic. MC9S08PT32 [LQFP44], blank check bug fixed
Freescale Semic. MC9S12XHZ256 [LQFP144], programming/verify bug fixed
GigaDevice Semic. GD25Q64C, security registers size bug fixed
ITE IT8110E, erase bug fixed
Microchip PIC16F818, load project file bug fixed
Microchip PIC16LF1503, Insertion test bug fixed
Microchip PIC24HJ12/32/64/128GPx02 [QFN-S28], programming device bug fixed
NEC/Renesas uPD78F0138H, verification procedure bug fixed
Nec/Renesas uPD78F089x, Automatic Yes! bug fixed
NXP LPC11C24, programming algorithm bug fixed
ON Semiconductor CAT25512, buffer size bug fixed
TI (TMS) UCD90120A [QFN64] (D), log file in PG4UWMC bug fixed

Best regards,

Daniel Smith

Return to “Software Update Notifications”

Who is online

Users browsing this forum: No registered users and 3 guests