Page 1 of 1

New software - Version 3.60

Posted: 30 Jun 2020 14:37
by Dataman (Daniel Smith)
Dear Dataman users,

New software has just been posted on our software pages for the Dataman 848Pro2 super fast stand-alone gang programmer.

Version 3.60 features the following amendments:

New Device Support
Many new devices have been added in this revision, please download the full device list to verify your chip is supported: Dataman848Pro2DeviceList.pdf

Major Changes
Fixed remote control command "clienprogramisready" to correctly return result "isnotready" (instead "isready") until PG4UW startup sequence is not completed
Fixed remote control commands handling during starting of PG4UW, to refuse executive remote control commands (device program, verify, ...) from customer's remote control application until PG4UW sw startup sequence is complete
In dialog PG4UW Multi-Project Wizard in Multi-Project description edit/view box, there was added vertical scrollbar
In PG4UW "Programmer activity log" added information about closing of PG4UW by command line parameters /Close or /Close:always
In PG4UWMC fixed load of different project file when any of programmer Site(s) has/have not programmer ready status, for example due to "communication error" of programmer Site's connected programmer
Multiproject build now correctly accepts user predefined operations from one-operation mode subprojects, even if the subprojects are encrypted
USB driver stability improved

Other Changes
Adapter DIL48/SOIC20-300 ZIF AVR-1 renamed to DIL48/SOIC20-300 ZIF AVR-3
Adapter DIL48/QFP32-1.04 ZIF AVR-1 renamed to DIL48/QFP32-1.04 ZIF AVR-4
Adapter DIL48/QFN32-1.02 ZIF AVR-2 renamed to DIL48/QFN32-1.02 ZIF AVR-4
Added adapter: BGA-Bottom-473 + BGA-Top-437 ZIF
Added adapter: DIL48/QFP112-1.03 ZIF R5F-1
Added adapter: DIL48/QFP128-1.01 ZIF ITE-1
Added adapter: DIL48/QFP48-1.02 ZIF R5F-10
Added adapter: DIL48/QFP64 ZIF STM32G4-1
Added adapter: DIL8W/TSSOP8 ZIF 170mil SFlash-1b
Analog Devices ADuCM362, ADuCM363, programming procedure improved
Atmel/Microchip ATmega16M1/32M1/32C1/64M1/64C1, power-on sequence modified
Atmel/Microchip ATmega48/88/168/328/A/V/P/PA/PB/PV, reading conditions and power-on sequence modified
Atmel/Microchip ATmega640/1280/2560 [CBGA100], added acceptance of BGA-top-117
Atmel/Microchip AT90PWM3/3B/316, Power-on sequence modified
Dallas/Maxim DS1086L, verification improved
Eon Silicon Sol. EN25QH64A (ISP), programming of Status Register and Special options (ALT+S) menu modified
GigaDevice GD32 in ISP mode(s), core halting procedure enhanced
GigaDevice GD32, added troubleshooting tool in Device operation options <Alt+O>
Infineon SAK-TC22x, added Margin control for Verify operation
Lattice ispLSI3256A [MQFP160], ID check routine improving
Lattice ispLSI3256A_ID [MQFP160], discarding of temporary test device
Lattice SVF, additional information about SVF generation
Maxlinear/Exar XRP7724, programming procedure improved
MindMotion MM32 in ISP mode(s), core halting procedure enhanced
MindMotion MM32, added troubleshooting tool in Device operation options <Alt+O>
NAND flash devices in TSOP48, insertion test improved
NXP LPC111xLV [HVQFN33], programming procedure improved
NXP LPC546xx, programming ECRP algorithm improved
PLD devices in LCCxx package, adding of additional information about a shim insertion
Read and verify modified for NXP Kinetis device with partitioning feature
Renesas/Intersil ISL6x1xx, verification improved
Renesas R4F2424xxxFP, log messages during action on device modified
Renesas R4F24245xxFP, erase modified
STMicroelectronics ST95P08, verifying of Status Register bug fixed
STMicroelectronics STM32, added troubleshooting tool in Device operation options <Alt+O>
TI RM44L520 [LQFP144], added programming option for OTP memory
Winbond W25Q128JWxxQ, read procedure improved for Status Registers
XMC XM25QH32C [SOP8-208], power-up modified

Bug Fixes
Fixed bug "Unexpected error 1" related to operations with adapter DIL48/QFP80 ZIF HCS12-1
GigaDevice GD32E230xxx in inZIF mode, programming procedure fixed (a bug on blank words count in)
Lattice M4A5-32/32, read action bug fixed
Micronas HAL805 [TO-92UT], Programming button disabled bug fixed
NXP/Philips PCF85103C-2, programming procedure bug fixed
Renesas R7F7010253AFP, programming procedure bug fixed
Serial NAND flash devices, Compatibility mode issue fixed (SPI NOR compatible mode setting backward compatibility)
STMicroelectronics STM32F412RxY [WLCSP64], message "Bad contact at pin(s) -8,-7,-5,-4,-3,-2,-1,.. of ZIF socket of programmer." fixed (in case of empty ZIF on DIL48/WLCSP64-3 ZIF STM32-3 adapter)
Winbond/Nuvoton W79E65x [QFP100], insertion test bug fixed

Best regards,

Daniel Smith