New software - Version 2.83

Software update notifications
Dataman (Daniel Smith)
Posts: 2263
Joined: 09 Nov 2011 14:36

New software - Version 2.83

Postby Dataman (Daniel Smith) » 18 Nov 2011 16:12

Dear Dataman users,

New software has just been posted on our software pages for the Dataman 48Pro universal ISP programmer.

Version 2.83 features the following amendments:

New Device Support
Many new devices have been added in this revision, please download the full device list to verify your chip is supported: Dataman48ProDeviceList.pdf

Major Changes
Improved features of "Protected mode" of PG4UW, now distinguishes between:
"Multi operation" mode - classic protected mode, represents basic form of protected mode, where all available device operations (blank, verify, program, erase) are enabled, except read.
"One operation" mode - represents enhanced form of protected mode, where only one operation from all available is enabled. Provides better certainty, because prevents operator from executing wrong type of device operation.
Improved features of "Multi-project" of PG4UW and PG4UWMC, now supports also running any sequence of master operations (Blank check, Verify, Program, Erase) with devices, depending on sub-projects contained in mentioned multi-project. Suitable for example for testing purposes or for programming flow customization.
In Pg4uwMC added option to automatically start control programs for programmer Site-s during start of Pg4uwMC. Function is available by command line parameter /autoconnectsites or by option "Auto-connect Sites" from dialog "Settings" in Pg4uwMC
In Pg4uwMC added option to see software Site number association with real Programmer Sites. Function is available via dialog "Show real Site location by LED" accessible by menu "Programmer | "Show real Site location by LED..."
In Pg4uwMC is added option to close program without saving current configuration. This can be done by menu "File | Exit without save..." or by key Alt+Q shortcut
Fixed shortcut associated to Program operation (F9) for projects with predefined allowed operation Program

Other Changes
Asix AX11005 [LQFP80], verify procedure improved
Atmel AT45DBxxxD, block erase added
Atmel AT90PWM81, power-on sequence improved
Atmel XMEGA series (ISP), power-on sequence improved
eMMC devices, Configure partitions improved
ESMT F25L16PA(2S), F25L08PA(2G), erase procedure improved
Fujitsu MB90350e series, correction of sector configuration
Microchip PIC12Fxxx, PIC16Fxxx, PIC18Fxxx, dsPIC30Fxxx families, added options "Preserve EEPROM memory"
Microchip PIC16LF1947, set of configuration bits improved
Microchip PIC24FJ32GA102, programming procedure improved
Microchip PIC24FJ32GA102, power-on procedure improved
NEC uPD78F0411, synchronization procedure improved
SST SST49LF160C, programmer algo step modified
STMicroelectronics STM32 devices, buffer save/load file capabilities enhanced
STMicroelectronics STM32 devices, Device info window redesigned
STMicroelectronics STM8S103K3T, "Option bytes" dialog window (shortkey) modified
TI (TMS) TBP28SA42, TBP28S42, power-on sequence modified
Xilinx XC3S-AN, block erase added
Xilinx XC3S-AN (SVF), improving of power down sequence, increasing of action stability
Xilinx XC95288XL [FBGA256], increasing of read/verify actions stability

Bug Fixes
3D Plus FN4G08VS1274 [SOP50], FN32G08VS8259 [SOP50], bad block detection bug fixed
AMD/Lattice/Vantis M4/M4Ax, addressing bug in E-field fixed
Atmel AT89LP51/52, erase bug fixed
Atmel ATmega1281/2561 (ISP-JTAG), faulty overrideEESAVEsetting rutine fixed
Atmel ATmega1281/2561 (ISP-JTAG), ATmega8, ATtiny48/88, At90PWM2/2B/216 (ISP), default fuse bits value fixed
Atmel ATtiny23u/43u, repaired function "Override EESAVE settings"
Atmel AVR8 series (ISP-JTAG), double blank check bug, when Erase before programming enabled fixed
Cypress CY8C20446A [QFN32], insertion test bug fixed
Cypress CY8C3446LTI-073 (ISP), communication error fixed
Eon EN29GL064 family, EN71GL064B0 [FBGA56], programming procedure bug fixed
Freescale Semic. MCF51QExxx, possibility to trim the internal oscillator in whole frequency range 31.25kHz - 39.0625kHz
Microchip dsPIC30F5015, device ID and verification procedure bug fixed
Microchip PIC16LF1946, programming of configuration bits bug fixed
Microchip PIC24FJ32GA102, configuration mask bug fixed
Microchip PIC24FJ32GA102, programming of configuration bits bug fixed
Microchip PIC32MX5xx/6xx/7xx (ISP-2wire), programming and reading procedures bug fixed
Micron MT29F4G08AAAWP [TSOP48], MT29F8G08DAAWC [TSOP48], MT29F16G08FAAWC [TSOP48], bad block detection bug fixed
NAND flash devices, DWO-01 and DWO-02 custom algorithms, "EDevOpt Fatal Error" fixed
NAND flash devices x16 -bus wide matching bug fixed (word 2211h was programmed as two words 0011h and 0022h)
NEC uPD78F0893 [LQFP80 12x12], synchronization procedure bug fixed
OKI MSM16812, buffer size bug fixed
Philips, NXP P89LPC9361 sector size bug fixed
Philips/NXP P89LPC9xx1, BOE0,BOE1 settings bug fixed
Spansion S70FL256Pxxx, "EDevOpt Fatal Error" after selection "Sector(s) to erase" more than 255 fixed
SST SST39VF1601 [TSOP48], "Unexpected error 1 [IEC:1, D:01]!" bug in verify procedure fixed
SST SST39VF3201 [TSOP48], "Unexpected error 1 [IEC:1, D:01]!" bug in verify procedure fixed
STMicroelectronics STM8L151K4T [LQFP32], power-on sequence bug fixed
TI (TMS) MSP430G2211 [QFN16], insertion test bug fixed

Best regards,

Daniel Smith

Return to “Software Update Notifications”

Who is online

Users browsing this forum: No registered users and 2 guests