New software - Version 3.24

Software update notifications
Dataman (Daniel Smith)
Posts: 1919
Joined: 09 Nov 2011 14:36

New software - Version 3.24

Postby Dataman (Daniel Smith) » 13 May 2016 15:16

Dear Dataman users,

New software has just been posted on our software pages for the Dataman 448Pro universal gang programmer.

Version 3.24 features the following amendments:

New Device Support
Many new devices have been added in this revision, please download the full device list to verify your chip is supported: Dataman448ProDeviceList.pdf

Major Changes
Fixed correct address range for highlighting of changed buffer blocks in dialog View/Edit buffer after operation "Fill buffer block" (with patterned string) and current buffer view mode x16
Fixed screen refresh after closing dialogs Load/save file/projects, when "Windows Classic" theme is used, to prevent fragments of the dialog remain on screen even after closing the dialog
Fixed installation program detection of parallel port (LPT) driver pardrv.sys for 64-bit Windows versions
Special Read-only mode of PG4UW software available, activated by command line parameter /forcereadonlymode
Text messages sent from PG4UW to PG4UWMC are no longer processed by word wrap operation
Fixed in PG4UWMC serialization error status to prevent efforts of programming of new devices (this state remains until next load project operation will be performed)
Fixed in PG4UWMC when serialization is used for recently used project: no checksum update is performed when programming devices with different serialization data in each device programming iteration

Other Changes
Altera EPM7128S, displaying of a device ID bytes during ID check error
Atmel ATmega164PA/1284 (ISP-SPI)(Enhanced), calibration bootloader updated
Atmel ATmega64/128/2561 (ISP-SPI)(Enhanced), calibration bootloader updated
Atmel ATmega640/1280/1281 (ISP-SPI)(Enhanced), missing calibration function added
Atmel ATmega640/1280/2560/1281 (ISP-SPI)(Enhanced), calibration bootloader updated
Atmel ATtiny441/841 (ISP-SPI)(OSCCAL)/(Enhanced), calibration bootloader updated
Atmel AVR xmega family, poweron sequence modified
Cygnal/Silicon Laborat. C8051F0xx/C8051F01x, ID check procedure modified
Energy Micro/Silicon Laborat. EFM32GGxxx/EFM32LGxxx/EFM32WGxxx, power-up sequence improved
Fujitsu/Spansion ISP-SPI devices, modification of target circuit design
Fujitsu/Spansion MB9BF416 (ISP-SPI), MB9AFAA1 (ISP-SPI), added option for setting the communication frequency
Hitachi HD6475368CP [PLCC84], programming and reading routines modified
Intersil/Zilker Labs ZL2105, programming procedure improved
Microchip PIC16F7x7, programming procedure improved
Samsung S3F4A1HKZZ (ISP-SPGM), range of Chip supply voltage changed
Spansion S25FL164K [SO16] (QuadSPI), added adapter DIL16W/SOIC16 ZIF 300mil SFlash-1a
TI (TMS) MSP430FRxxx, erase procedure and power-on sequence modified
Xilinx XC95288XL/XV [FBGA256], information about adding of additional capacitors in case of unreliable programming

Bug Fixes
AKM (Asahi Kasei) AK64x0xF, pin assignment bug fixed
Altera 10Mxxxx [UBGA169], AutoYes! problem fixed
Atmel AT93C86A (1.8V) (x8) [UDFN8-2x3]/AT93C86A (1.8V) (x16) [UDFN8-2x3], insertion test bug fixed
Atmel AVR xmega family, communication error bug fixed
Freescale Semic. S912XEP100 [LQFP144], "device does not respond" bug fixed
Intersil/Zilker Labs ZL2x05, programming bug fixed
Micron N25Q064A13E (ISP), "Unexpected error 1 [IEC:1, D:10]!" bug fixed
Spansion S25FL128SxxBxxA1 [BGA24], insertion test bug fixed
STMicroelectronics M50FLW080A, default program action bug fixed
TI (TMS) PGA450, OTP area size corrected
TI (TMS) RM42L432, ID check error and programming bug fixed

Best regards,

Daniel Smith

Return to “Software Update Notifications”

Who is online

Users browsing this forum: No registered users and 2 guests