New software - Version 3.35

Software update notifications
Dataman (Daniel Smith)
Posts: 2263
Joined: 09 Nov 2011 14:36

New software - Version 3.35

Postby Dataman (Daniel Smith) » 20 Oct 2017 14:53

Dear Dataman users,

New software has just been posted on our software pages for the Dataman 448Pro+ universal ISP gang programmer.

Version 3.35 features the following amendments:

New Device Support
Many new devices have been added in this revision, please download the full device list to verify your chip is supported: Dataman448Pro+DeviceList.pdf

Major Changes
Fixed bug in checking of adapter BGA-Bottom-215 + BGA-Top-117 ZIF (a)
Load project operation fixed error "SHA1 check sum mismatch error!" that could occur for some older project files

Other Changes
3D Plus 3DPOxxx, Xilinx XC17xxx, adding of information about recommended input file format
Adapter DIL48/QFN32-1.02 ZIF EFM-3, insertion test improved
Added adapter: DIL48/QFN32-1.02 ZIF TLSR-1
Added adapter: DIL48/QFN40-2.02 ZIF TPS53-3
Added adapter: DIL48/QFN48-2.02 ZIF ISL-1
Atmel/Microchip ATSAM4Sxxx, initialization procedure improved
Microchip PIC18F8680, programming configuration bits improved
eMMC devices, ID check improved
eMMC devices, programming Authentication Key improved
Giantec Semicond. GT24C256A, programming procedure improved
ISSI IS25LQ040B, IS25LQ020B, IS25LQ010B, IS25LQ512B, Checking device ID improved
Lattice LFE2-6SE [fpBGA256](Jam), removing of device support because of incompatible JAM file syntax
Microchip ATSAMDxx, erase operation improved
Micron MT29F16G08ABABAWP [TSOP48], default User Area - Number of Blocks value changed
Numonyx N25Q128Ax1B [SO16], changed device name and backward project compatibility correction
Numonyx N25Q128Ax1B [TBGA24] (Quad I/O), changed device name and backward project compatibility correction
Numonyx N25Q128Ax1B [TBGA24], changed device name and backward project compatibility correction
Numonyx N25Q128Ax1B [VDFPN8] (Quad I/O), changed device name and backward project compatibility correction
Numonyx N25Q128Ax1B [VDFPN8], changed device name and backward project compatibility correction
NXP PN7462AU [HVQFN64], programming algorithm improved
NXP/Freescale Semic. MC68HC705JJ7 [SOIC20], programming of the COPR register improved
Renesas RH850 Family, programming procedure improved
Spansion S70FS01GSxxBxx21 [BGA24], power-up procedure improved
STMicroelectronics BlueNRG-132 [QFN32], name changed, old name BlueNRG-1 [QFN32]
STMicroelectronics STM32L4xx, operations speed improved (in-ZIF mode)
TI (TMS) TMS320F2802x [TSSOP38], programming algorithm improved
Xilinx XC17/17S/17V, adding of checksum type into log output
Xilinx XC17xxx/17Sxxx, improving of information about RESET polarity bit

Bug Fixes
Altera EPCS1 [SOIC8], erase error fixed
Atmel/Microchip ATSAM4SD16CA [LQFP100], Automatic YES! bug fixed
Energy Micro/Silicon Laborat. EFM32xxx/EFM8xxx/EZR32xxx, load and save of hex files bug fixed
Fixed bug relating to the selection of devices supported by adapter DIL48/QFN40-1.02 ZIF LT-1
Infineon XC22xxH devices, ID check error fixed
Microchip PIC24FJxxxGB106, programming of configuration bits bug fixed
Micron MTFC8GAKAJCN-1M [VFBGA153], RPMB size bug fixed
Nec/Renesas uPD78F1831, insertion test bug fixed
NXP/Freescale Semic. MC68HC908AB32/08AB16A, programming bug fixed
NXP/Freescale Semic. SPC5645S [LQFP208], verify error after programming bug fixed
NXP/Philips LPC11E37/501 (ISP-SWD), programming bug fixed
Renesas R5F72549RKBGV, programming bug fixed
Spansion S70FS01GSxxBxx21 [BGA24], current fuses fixed
TI (TMS) TMS320F28069, flash size bug fixed
XTX XT25F128A [SOP8-200], device name bug fixed

Best regards,

Daniel Smith

Return to “Software Update Notifications”

Who is online

Users browsing this forum: No registered users and 5 guests