New software - Version 3.51

Software update notifications
Dataman (Daniel Smith)
Posts: 2027
Joined: 09 Nov 2011 14:36

New software - Version 3.51

Postby Dataman (Daniel Smith) » 05 Jul 2019 10:06

Dear Dataman users,

New software has just been posted on our software pages for the Dataman 448Pro2AP-AU gang programmer with built-in actuation unit.

Version 3.51 features the following amendments:

New Device Support
Many new devices have been added in this revision, please download the full device list to verify your chip is supported: Dataman448Pro2AP-AUDeviceList.pdf

Major Changes
Menu/Device/Device options/Associated file: file path not accepting brackets bug - fixed
Unified buttons Yes, No, Ok, Cancel, Close, Help across dialogs

Other Changes
Added module: AP1 QFN24-1.02 ZIF CY-2
Added module: AP1 QFN32-1.02 ZIF STM32-2
Added module: AP1 QFP32-1.04 ZIF MC56F-1
Added module: AP1 QFP44-1.04 ZIF CY-1
Added module: AP1 QFP48-1.02 ZIF R5F-6
Added module: AP1 QFP48-1.02 ZIF NUC-5
Added module: AP1 QFP64-1.02 ZIF CY-1
Added module: AP1 QFP64 ZIF FM3-2
ABLIC/Seiko Instruments S-24CS02xxx, added empty check before programming
AMD/MMI PAL16L8A-2, improving of programming actions
Atmel AT24C128B, AT24C256B, AT24C512B, added empty check before programming
Atmel/Microchip AT89LP51xxx, added skipping User Row location 180h verify option
Atmel/Microchip AT89LP51RB2 [PLCC44], programming procedure improved
Convenient Power. EC8010, added support of OTP memory
Energy Micro/Silicon Laborat. EFM32Gxxx devices, Erase procedure modified
Energy Micro/Silicon Laborat. EFM32Gxxx devices, Power-up sequence modified
Freescale semic., NXP MC9S08PT algorithm stability improvement
Fresco Logic FL7102-xxx [QFN40], added programming new area (Customize Data)
Giantec Semicond. GT24C02, GT24C16, GT24C32, GT24C32A, GT24C64, GT24C128A, added empty check before programming
GigaDevice Semic. GD25B256D [WSON8 8x6] (QuadSPI), verifying of Status register improved
Holtek HT24LC32, added empty check before programming
Hua Jie Tech./K-LINE K24C128, added empty check before programming
Infineon TLE9879QXA40-BF [VQFN48](FastLIN BSL), TLE9879QXA40-BF [VQFN48](UART BSL), NAC[7..6] changed
Intel/Altera 10AX066xxF34 [FBGA1152](Jam), 10AX090xxF34 [FBGA1152](Jam), power-up sequence improved
ISSI IS24C32A, added empty check before programming
Macronix MX30LF4G18AC, MX30LF4G189C, MX60LF8G18AC, OTP support added
Microchip/Atmel AT24C02C, AT24C32D, AT24C64D, AT24C256C, added empty check before programming
Microchip 24LC32A, 24FC64, 24FC128, added empty check before programming
Microchip PIC32MZ Family, Alt+O menu and Ctrl+F1 improved
NEC/Renesas uPD70F337x, programming procedure improved
ON Semiconductor/Catalyst (CSI) CAT24C02, added empty check before programming
Raydium RM24C02, RM24C32, RM24C64, added empty check before programming
Realtek RTL8762AR [QFN32], programming procedure improvement
Realtek RTL8762AJ [QFN40], programming procedure improvement
Realtek RTL8752CRF [QFN32], power-up delay increased
Rohm BR24G02xxx-W, BR24G32xxx-3A, BR24G32FVT-W, BR24G512xx-3A, BR24T02, BR24T32, BR24T64, BR24T128, BR24T256, BR25S256-W, verify procedure improved
Serial NAND flash, improved procedures for OTP lock enabling and OTP lock status checking
STMicroelectronics STM32L0xx, modified blank check procedure for off-board programming
STMicroelectronics STM32F7xx, modified blank check procedure for off-board programming
STMicroelectronics STM32L4xxRxY [WLCSP64], added BGA programming adapter information to Device info window
STMicroelectronics BlueNRG-132 [QFN32], Power-up sequence improved
STMicroelectronics M24C02-R, M24C02-W, M24C32-R, M24C32-W, M24C64-R, M24128-BR, M24256-BR, M24512-R, added empty check before programming
Telink Semicond. TLSR8646F512ET32, TLSR8267F512ET32 - erase procedure improved
TI (TMS) MSP430FRxxx, power-up procedure modified
TI (TMS) TIBPAL16R4-15, improving of programming actions
TI (TMS) TMS320F2806x, added support of OTP GetMode locations
TI (TMS) LM4F1xxxx, LM4F2xxxx, TM4C1xxxxx, XM4C1xxxxx [LQFP100], improving of insertion test
TI (TMS) BQ26100 [SON6], programming of KEYx messages improved
Winbond W25Q128JVxxQ [SOIC16] (QuadSPI), added reading of Status Register 3

Bug Fixes
Atmel/Microchip, ATmega3208/3209, device size bug fixed
Cypress CY8C4127AZI-S455, verification of protection bug fixed
Cypress S29PL127JxxBxx01 [FBGA80], Automatic YES bug fixed
EPROM 27C800 [DIL42] family, insertion test bug fixed
GigaDevice Semic. GD25B256D [WSON8 8x6] (QuadSPI), programming and verifying of Status register bug fixed
Hitachi/Reneas HD64F7055R [QFP256], power-up bug fixed
Infineon TLE9842-2QX [VQFN48](FastLIN BSL), NVM address range test bug fixed
Macronix MX25L25673G [WSON8 8x6] (Quad I/O), Programming registers - error! bug fixed
Melexis MLX81108, marginal verify bug fixed
Microchip PIC16F1615, PIC16F1619, PICmicro checksum calculation bug fixed
Micron MT29F1G08ABAEAH4 [VFBGA63] (EMT-01), MT29F2G08ABAEAH4 [VFBGA63] (EPS-13), MT29F4G08ABADAH4-AATX [VFBGA63] (EPS-19), MT29F4G08ABADAH4-AATX [VFBGA63] (EPS-20), iMX compatible BCH ECC engine modified (bit stream compilation fixed)
Nuvoton N569Sxxx series, programming Config 0 register bug fixed
Nuvoton NUC2xxxxxAE family, ID check bug fixed
Parallel NAND flash devices, fixed programming speed (has been significantly slowed down due to error)
SPI EEPROM - verification of Status Register bug fixed
Spansion S29PL127JxxBxx01 [FBGA80], Automatic YES bug fixed
STMicroelectronics STM32L4xxxx (ISP-JTAG CHAIN), fixed missing chain parameters setting in <Alt+O>
TI (TMS) TIBPAL16R4-15, device overcurrent error during read actions after programming fixed
TTL 74136, vectors for IC test fixed
AP1 MLF32-1 ZIF-2 bug fixed

Best regards,

Daniel Smith

Return to “Software Update Notifications”

Who is online

Users browsing this forum: No registered users and 1 guest