Dataman S6, project set to OKI - MSM27512(DIP28)
OTP EPROM = OKI M27512 OTP (DIP28)
[2020 / 04 / 15 - 14:46:09] ID Check
[2020 / 04 / 15 - 14:46:09] Manufacturer Code = 0x00FF, Device Code = 0x0000
[2020 / 04 / 15 - 14:46:09] ID Check Fail!
When I go to save the data, nothing is there, it can't read this one. Works fine a few others I've tried so far. Thank you for your help.
ID Check Fail
-
- Posts: 933
- Joined: 10 Nov 2011 09:51
Re: ID Check Fail
Hello,
Thank you for using our forum.
Our engineers have modified the related algorithms which should help.
Please download the revised driver from the following link:
MSM27256(DIP28)
MSM27512(DIP28)
https://www.dataman.com/downloads/dl/fi ... tabase.zip
If you have any questions, please contact me.
Best regards,
Neil Parker
Dataman Programmers
Thank you for using our forum.
Our engineers have modified the related algorithms which should help.
Please download the revised driver from the following link:
MSM27256(DIP28)
MSM27512(DIP28)
https://www.dataman.com/downloads/dl/fi ... tabase.zip
If you have any questions, please contact me.
Best regards,
Neil Parker
Dataman Programmers
-
- Posts: 16
- Joined: 15 Apr 2020 17:19
Re: ID Check Fail
Wow, awesome! THANK YOU!Hello,
Thank you for using our forum.
Our engineers have modified the related algorithms which should help.
Please download the revised driver from the following link:
MSM27256(DIP28)
MSM27512(DIP28)
https://www.dataman.com/downloads/dl/fi ... tabase.zip
If you have any questions, please contact me.
Best regards,
Neil Parker
Dataman Programmers
Who is online
Users browsing this forum: No registered users and 1 guest