Hello,
I can't read/erase any GAL's, specifically 20 dip, GAL16V8B H415D21 (15LP) or GAL16V8B H328D55 (25LP)
Thank you in advance.
GAL16V8B H415D21 or H328D55
-
- Posts: 933
- Joined: 10 Nov 2011 09:51
Re: GAL16V8B H415D21 or H328D55
Hello mektrix5000,
We do not currently support this GAL device on the Dataman-S6 programmer so I will ask our engineers if we can implement the programming support. As soon as I have more information I will post an update here.
Best regards,
Neil Parker
Dataman Programmers
We do not currently support this GAL device on the Dataman-S6 programmer so I will ask our engineers if we can implement the programming support. As soon as I have more information I will post an update here.
Best regards,
Neil Parker
Dataman Programmers
-
- Posts: 16
- Joined: 15 Apr 2020 17:19
Re: GAL16V8B H415D21 or H328D55
Thanks Neil, appreciate the quick response.Hello mektrix5000,
We do not currently support this GAL device on the Dataman-S6 programmer so I will ask our engineers if we can implement the programming support. As soon as I have more information I will post an update here.
Best regards,
Neil Parker
Dataman Programmers
-
- Posts: 933
- Joined: 10 Nov 2011 09:51
Re: GAL16V8B H415D21 or H328D55
Hello mektrix5000,
Our engineers have confirmed that we are able to add support for both of the mentioned devices.
GAL16V8B H415D21 (15LP)
GAL16V8B H328D55 (25LP)
Our engineers have requested samples, 1-2 pcs (non-returnable) of each device to allow us to finalise the programming support.
If you wish to proceed then please send the devices for my attention to:
Dataman Programmers Ltd
Attn: Neil Parker
Unit 2 Newton Hall
Dorchester Road
Maiden Newton
Dorset
DT2 0BD
UK
Tel: +44 (0)1300 320719
If you have any questions please do not hesitate to contact me.
Best regards,
Neil Parker
Dataman Programmers
Our engineers have confirmed that we are able to add support for both of the mentioned devices.
GAL16V8B H415D21 (15LP)
GAL16V8B H328D55 (25LP)
Our engineers have requested samples, 1-2 pcs (non-returnable) of each device to allow us to finalise the programming support.
If you wish to proceed then please send the devices for my attention to:
Dataman Programmers Ltd
Attn: Neil Parker
Unit 2 Newton Hall
Dorchester Road
Maiden Newton
Dorset
DT2 0BD
UK
Tel: +44 (0)1300 320719
If you have any questions please do not hesitate to contact me.
Best regards,
Neil Parker
Dataman Programmers
-
- Posts: 16
- Joined: 15 Apr 2020 17:19
Re: GAL16V8B H415D21 or H328D55
Ah ok, didn't realize you were located in the UK. I'll get back to you if I decide to ship them, thanks Neil.
-
- Posts: 16
- Joined: 15 Apr 2020 17:19
Re: GAL16V8B H415D21 or H328D55
Hi Neil, can you tell me which brand/model the Dataman supports? GAL16V8D(DIP20) is in the software list already, is it the brand I chose that's incompatible? Thank you.
-
- Posts: 933
- Joined: 10 Nov 2011 09:51
Re: GAL16V8B H415D21 or H328D55
Hello,
The currently supported device is the Lattice GAL16V8D.
Where are you based? We have an office in Florida, USA which you can send the requested samples to.
Best regards,
Neil Parker
Dataman Programmers
The currently supported device is the Lattice GAL16V8D.
Where are you based? We have an office in Florida, USA which you can send the requested samples to.
Best regards,
Neil Parker
Dataman Programmers
-
- Posts: 16
- Joined: 15 Apr 2020 17:19
Re: GAL16V8B H415D21 or H328D55
I'm in the US, Florida would be great! Please forward the address information and I'll drop them in the mail. Thank you
-
- Posts: 16
- Joined: 15 Apr 2020 17:19
Re: GAL16V8B H415D21 or H328D55
Shipped, wanted to send you the tracking number but the forum won't allow me to send you a PM. Thanks
-
- Posts: 933
- Joined: 10 Nov 2011 09:51
Re: GAL16V8B H415D21 or H328D55
Please use [email protected] which will come through to me.
Best regards,
Neil Parker
Dataman Programmers
Best regards,
Neil Parker
Dataman Programmers
Who is online
Users browsing this forum: No registered users and 0 guests