New software - Version 3.78

Software update notifications
Dataman (Daniel Smith)
Posts: 2254
Joined: 09 Nov 2011 14:36

New software - Version 3.78

Postby Dataman (Daniel Smith) » 15 Jul 2022 13:54

Dear Dataman users,

New software has just been posted on our software pages for the Dataman 48Pro2AP super fast industrial universal programmer.

Version 3.78 features the following amendments:

New Device Support
Many new devices have been added in this revision, please download the full device list to verify your chip is supported: Dataman48Pro2APDeviceList.pdf

Major Changes
Fixed Word sum Little Endian (x16) and Word sum Big Endian (x16) checksum calculation
PG4UW: General Options/File options/Load file format - Automatic/Manual - setting was not taken into account, bug fixed

Other Changes
Added module: AP1 QFN32-1.02 ZIF RTL-2
Added module: AP1 QFN32-1.02 ZIF STM32-2&GD32
Added module: AP1 QFN48-2.02 ZIF MP-1
Added module: AP1 QFP32 ZIF STM32&GD32
Added module: AP1 SOIC28-300 ZIF ML51-1
Added module: AP1 TSSOP28-170 ZIF M03x-1
Analog Devices/Linear Technology LTC2977, stability of programming device improved
Anlogic SALELF2, improving of programming speed, improving of overcurrent protection system
cFeon(Eon Si.Sol.) EN25QH32B(2C), setting Protected memory modified
Dosilicon DS25M4ABxxxB4, setting Protected memory modified
Eon Silicon Sol. EN25QH32B(2C), setting Protected memory modified
ESMT EN25QH32B(2C), setting Protected memory modified
Fudan Microelect. FM25W128, FM25Q128A, setting Protected memory modified
GigaDevice GD25B128C, GD25Q128E, GD25WQ128E, GD25LF128E, GD25B128E, MD25Q128SxG, GD25B64E, GD25B64B, GD25B32B, GD25VQ32C, GD25R127D, GD25R64C, setting Protected memory modified
Infineon XMC1403-xxxxx0200AA (ISP), erase procedure improved
Intersil/Renesas ISL69260, improved of show device revision in log
Juyang Technology JY25VQ64A, setting Protected memory modified
Maxim MAX32651 [WLP96], Erase procedure modified
Microchip PIC12C671 [SOIC8], power-up procedure improved
Micronas HAL3930 [SOIC8-150], Added "View/Edit content of registers" window (ALT+S)
MPS MP2973, verifying device improved
NOR-MEM NM25Q64EVB, NM25Q128FVB, setting Protected memory modified
Realtek RTL8752CJF, RTL8762CJF [QFN40], power-up procedure improved
Renesas RH850, RL78 family, improved Load File window
TI (TMS) CDCI6214 [VQFN24], "EEPROM HEX files (*.hxt)" format added
TI (TMS) TMS320F28035 [QFP80], programming algorithm improved
XMC XM25QH32C, XM25QU32CHxGxxxQ, XM25QH64CHxQxxxS, XM25QU64CHxQxxxS, XM25QH128CHxQxxxQ, XM25UH128CHxQxxxQ, XM25QU128CHxQxxxQ, XM25LU128CHxQxxxS, XM25RH128CWxQxxxS, XM25RU128CWxQxxxS, XM25QH256CHxQxxxH, XM25QU256CHxQxxxH, XM25RH256CXxQxxxS, XM25RU256CXxQxxxS, setting Protected memory modified
Zbit ZB25VQ64, ZB25VQ128, setting Protected memory modified
Zetta ZD25Q64A, NB25Q64, ZD25Q32, setting Protected memory modified

Bug Fixes
Adesto Techn. AT25XE321D [SOIC8-200] (Quad I/O), ID check error bug fixed
Atmel/Microchip ATSAMD20J15B [QFN64], bad reference on suitable adapter fixed
Microchip dsPIC33CK32/64MP10x, PICmicro checksum calculation bug fixed
Module AP1 QFP48 ZIF STM32-3, support fixed
Module AP1 QFP48 ZIF STM32-3&GD32, support fixed
Renesas R7FA6M3AFxxFC, device info bug fixed
Renesas RH850, RL78 Family, Panasonic C2CBYY002775 [LQFP80 14x14], load hex file bug fixed
STMicroelectronics M8571, programming bug fixed
STMicroelectronics STM32G4xx, fix for "SWJDP communication problem" when RDP lvl2 is programmed
TI (TMS) BQ27520-G4, programming bug fixed

Best regards,

Daniel Smith

Return to “Software Update Notifications”

Who is online

Users browsing this forum: No registered users and 0 guests