New software - Version 3.80

Software update notifications
Dataman (Daniel Smith)
Posts: 2282
Joined: 09 Nov 2011 14:36

New software - Version 3.80

Postby Dataman (Daniel Smith) » 18 Oct 2022 11:16

Dear Dataman users,

New software has just been posted on our software pages for the Dataman 48Pro2C super fast universal ISP programmer.

Version 3.80 features the following amendments:

New Device Support
Many new devices have been added in this revision, please download the full device list to verify your chip is supported: Dataman48Pro2CDeviceList.pdf

Major Changes
Fixed dialog "View/Set excluded blocks for": button "OK" is always enabled

Other Changes
Added adapter: BGA-Top-202a
Added adapter: DIL48/QFN24-1.02 ZIF A59-1
Added adapter: DIL48/QFN24-1.02 ZIF CY-4
Added adapter: DIL48/QFN48-2.02 ZIF PIC-2
Added adapter: DIL48/QFP48-1.02 ZIF AT32-1
Added adapter: DIL48/QFN68-1.02 ZIF ISL-1
Added adapter: DIL48/QFP128-1.01 ZIF PLD-7
Added adapter: DIL48/QFP144-1.02 ZIF PLD-23
Added adapter: DIL48/QFP160 ZIF-CS MC56F-1
Added adapter: DIL48/QFP176-1.02 ZIF xPC5x-3
Added adapter: DIL48/TSSOP20-170 ZIF AT32-1
Added adapter: DIL48/TSSOP20 ZIF A59-1
Added adapter: DIL48/TSSOP38-240 ZIF R5F-1
Added support for Microchip FPGA and SoC FPGA (ex Microsemi, ex Actel)
ARTERY AT32F421, operations speed-up
Dallas/Maxim DS28E01, load first secret programming procedure modified
GOWIN GW2AN-UV18X [UBGA484], improving of read/verify actions for specific SW setting (background programming = INTERNAL)
Freescale Semic./NXP xxS12Pxxx, xxS12ZVLxxx, added copy of security settings warning dialog content to LOG
ISSI IS25LP032D, IS25WP032D-J, IS25LP512M-TH, IS25WP016-J, IS25WP016D-J, IS25LP016D-J, setting Protected memory modified
Macronix MX25U25643GXD [TFBGA24] (Quad I/O), changed device name and backward project compatibility
Microchip dsPIC33C Family, programming OTP improved
Microchip PIC24FJ64GP205, verification of Configuration bits improved
Modified DIL48/QFP48-1.02 ZIF STM32G4-1
Motorola/Freescale Semic. xxx908AS32, xxx908AS60, removed masking of 0x80 bit of EENVR1, EENVR2 registers in Special settings dialog
Motorola/Freescale Semic. xxx908AS32, xxx908AS60, default value of EENVR1, EENVR2 set to 0xFF after Erase
Silicon Laborat. EFM8BB10Fx devices, added address ranges for programming options in the Device operation window <Alt+O>
STMicroelectronics STM32Fxxx, STM32Lxxx, insertion test improved
TI (TMS) MSP430G2855 (ISP-4wire JTAG), programming operation speed-up
TI (TMS) TPS53685 [QFN40], TPS536C5 [QFN48], change support of PMBus Programming Script file to NVM Config Script file
Winbond W25Q256JVxxxQ [SOIC16] (QuadSPI), Special options (ALT+S) menu and verification procedure improved
XMC XM25QH128BHxQ, XM25QU128BHxQxxxH, XM25QH40B, XM25QU40B, setting Protected memory modified

Bug Fixes
Infineon TDA38640 rev. 4, TDA38740 rev. 4, verifying error after programing bug fixed
Microchip 24LC08B, verification bug fixed
Microchip 24xx515, 24xx1025, 24xx1026, reading/verification bug fixed
Microchip dsPIC33CK32/64/128/256MP20x/50x, dsPIC33CH256/512MP20x/50x, programming configuration words bug fixed
Motorola/Freescale Semic. xxx908AS32, xxx908AS60, EENVR1, EENVR2 faulty programming bug fixed
NAND flash devices, positive offset problem fixed on file load
Spansion S25FS512Sxxxxxx1 (ISP), incorrect size of device fixed

Best regards,

Daniel Smith

Return to “Software Update Notifications”

Who is online

Users browsing this forum: No registered users and 0 guests