Hello,
D48 doesn't recognize 12F675, and many other new pics.
Can you update your software V4.64?
Please, don't tell about update D48-XP, it's too expansive, and I don't need it.
Thanks
regards
Nelly
D48 - 12F675
Re: D48 - 12F675
HI again,
I don't understand.
If I download your new software 5.20 for new updgrade, in test-mode, There's NO PIC 16F877A, NO PIC 12F675 etc.
What's happend ?????
regards
Nelly
I don't understand.
If I download your new software 5.20 for new updgrade, in test-mode, There's NO PIC 16F877A, NO PIC 12F675 etc.
What's happend ?????
regards
Nelly
-
- Posts: 933
- Joined: 10 Nov 2011 09:51
Re: D48 - 12F675
Hi Nelly,
You must ensure that you use Add/Remove in Windows to uninstall your old D48 software before
installing the new version. The PIC 16F877a and PIC 12F675 are definitely supported in software version 5.20.
Hope this helps,
Neil
You must ensure that you use Add/Remove in Windows to uninstall your old D48 software before
installing the new version. The PIC 16F877a and PIC 12F675 are definitely supported in software version 5.20.
Hope this helps,
Neil
-
- Posts: 933
- Joined: 10 Nov 2011 09:51
Re: D48 - 12F675
Hi
The D48 cannot recognise PICs (or any other MCU). Autoidentification works ONLY for parallel EPROMs.
Do not use auto ID for other devices.
So basically that means you have to select the device manually from the menu and then you can program it.
Hope this helps
Neil
The D48 cannot recognise PICs (or any other MCU). Autoidentification works ONLY for parallel EPROMs.
Do not use auto ID for other devices.
So basically that means you have to select the device manually from the menu and then you can program it.
Hope this helps
Neil
Re: D48 - 12F675
Hi,
I don't understand. My D48 recognize all pics (it's universal programmer)
Only new pics are not recognized
If I don't select auto-ID, the dataman don't programm 16F877 neither.
Nelly
I don't understand. My D48 recognize all pics (it's universal programmer)
Only new pics are not recognized
If I don't select auto-ID, the dataman don't programm 16F877 neither.
Nelly
-
- Posts: 933
- Joined: 10 Nov 2011 09:51
Re: D48 - 12F675
Hi,
Please use manual selection to select these newer PIC devices. If you sre unsure of how to do this please contact me direct [email protected] or telephone 01300 322908 and I will give you step by step instructions.
Regards,
Neil
Please use manual selection to select these newer PIC devices. If you sre unsure of how to do this please contact me direct [email protected] or telephone 01300 322908 and I will give you step by step instructions.
Regards,
Neil
Return to “Dataman 48, 48LV, 48XP and 48UXP”
Who is online
Users browsing this forum: No registered users and 1 guest