Dataman Forum

Hello,

D48 doesn't recognize 12F675, and many other new pics.

Can you update your software V4.64?

Please, don't tell about update D48-XP, it's too expansive, and I don't need it.

Thanks
regards

Nelly

HI again,

I don't understand.
If I download your new software 5.20 for new updgrade, in test-mode, There's NO PIC 16F877A, NO PIC 12F675 etc.

What's happend ?????

regards

Nelly

Hi Nelly,

You must ensure that you use Add/Remove in Windows to uninstall your old D48 software before
installing the new version. The PIC 16F877a and PIC 12F675 are definitely supported in software version 5.20.

Hope this helps,

Neil

Hi

The D48 cannot recognise PICs (or any other MCU). Autoidentification works ONLY for parallel EPROMs.
Do not use auto ID for other devices.

So basically that means you have to select the device manually from the menu and then you can program it.

Hope this helps

Neil

Hi,

I don't understand. My D48 recognize all pics (it's universal programmer)

Only new pics are not recognized

If I don't select auto-ID, the dataman don't programm 16F877 neither.

Nelly

Hi,

Please use manual selection to select these newer PIC devices. If you sre unsure of how to do this please contact me direct [email protected] or telephone 01300 322908 and I will give you step by step instructions.

Regards,

Neil