Page 1 of 1
Can I program a AT17F32 with the 48XP?
Posted: 11 Nov 2011 11:32
by Guest
Can I program a AT17F32 with the 48XP?
Bill Hunter
Re: Can I program a AT17F32 with the 48XP?
Posted: 11 Nov 2011 11:33
by Dataman (Neil Parker)
Bill
That part is not yet supported on our programmers. No support plan until Atmel requests us to support it.
So far no request or support from ATMEL.
We support 17F020/040/080.
Neil
Re: Can I program a AT17F32 with the 48XP?
Posted: 11 Nov 2011 11:33
by Guest
How to program MC68HC811E2 in bootstrap mode using 48XP. Also there is problem with the Cypress CY7C344. All of the IC's I have do not pass the Blank Check.
Marshall
Re: Can I program a AT17F32 with the 48XP?
Posted: 11 Nov 2011 11:33
by Guest
Can I programming PIC16F877a with dataman-48LV + Software version 4.67?
Best Regard.
NE
Re: Can I program a AT17F32 with the 48XP?
Posted: 11 Nov 2011 11:34
by Dataman (Neil Parker)
Hi,
I am afraid that the A version of this part is not supported on the D48LV software. You will need to upgrade your programmer to the XP verison to enjoy support for the PIC1F877A
Neil
Re: Can I program a AT17F32 with the 48XP?
Posted: 11 Nov 2011 11:34
by Guest
Hello,
I need to program TI TMS370C758AFNT.
It appears adapter SDP-320E-68 might work.
Do you have an algorythm to read and program this device?
Thanks,
Al Johnson
Re: Can I program a AT17F32 with the 48XP?
Posted: 11 Nov 2011 11:34
by Guest
Does any one have the programming waveform for the older CY7C344 ...Thanks