Charging problem ?

Topics related to the Dataman S4
Guest
Posts: 723
Joined: 09 Nov 2011 17:16

Charging problem ?

Postby Guest » 14 Nov 2011 15:32

After short time my S4 is beeping and switch off automatically.
The battery voltage is measured to 8.2V. The internal Lithium Battery is measured to 0.7V.

The problem has been increasing during time, and it seems that the charging circuit is working, but not able to charge the battery.

Do I need a new battery pack and lithium cell ? - or is there anything else I can do ? - and where can I order it ?

Torben W. Hansen

Dataman (Neil Parker)
Posts: 931
Joined: 10 Nov 2011 09:51

Re: Charging problem ?

Postby Dataman (Neil Parker) » 14 Nov 2011 15:32

Hello Torben,

The S4 is programmed to turn off when battery voltage falls to 8.4V. The lithium cell should be giving at least 3V whilst in circuit.

To be honest it sounds as though your nicad pack has become faulty or just worn out with time and use. Please purchase a new battery pack and lithium cell from us.

Neil

Guest
Posts: 723
Joined: 09 Nov 2011 17:16

Re: Charging problem ?

Postby Guest » 14 Nov 2011 15:33

Hello Neil,

Thanks for the answer - Please inform me how to order the battery pack and lithium cell.

Here is my company information:

Intersoft Nexo A/S
Myrevej 4A
DK 3730 Nexø
DENMARK

VAT No.: SE 13405700
Tel. +45 56972404
email: [email protected]



I hope this message will be posted to the right thread :o)

Best regards...

Torben W. Hansen

Dataman (Neil Parker)
Posts: 931
Joined: 10 Nov 2011 09:51

Re: Charging problem ?

Postby Dataman (Neil Parker) » 14 Nov 2011 15:33

Torben,

You can place the order by phone on +44 1300 320719 and pay by credit card or on online through our website.

Regards,

Neil

Guest
Posts: 723
Joined: 09 Nov 2011 17:16

Re: Charging problem ?

Postby Guest » 14 Nov 2011 15:33

Okay and thanks :-)

Best regards
Torben W. Hansen


Return to “Dataman S4”

Who is online

Users browsing this forum: No registered users and 13 guests