Dataman Forum

Hi,

We have changed the battery and now turn on Dataman S4 and then it display
" No Library Loaded "

We need to burn a Eprom ST M27C256B by Dataman S4 and I would like to consult with you that my procedure as follow is correct or not.
1./ Download the program " 8-Bit EPROM Library " Version 3.0 from S4 Resources
2./ Download and install the software 2.17 in PC
3./ Transfer the Library to Dataman S4 as per the manual.

Please kindly correct me if my understanding is not correct.

Thanks

Goloo

Hello Goloo,

Your procedure is correct. For more detailed information on loading a new library into the S4 from a PC please visit our S4 resources page on our website here.

If you have any problems please let me know.

Best regards,

Neil Parker