New software - Version 2.24a

Software update notifications
Dataman (Daniel Smith)
Posts: 2264
Joined: 09 Nov 2011 14:36

New software - Version 2.24a

Postby Dataman (Daniel Smith) » 15 Nov 2011 09:47

Dear Dataman users,

New software has just been posted on our software pages for the Dataman 40Pro universal programmer.

Version 2.24a features the following amendments:

New Device Support
Atmel
AT25128A-1.8 [dBGA2-8]
AT25256A-1.8 [dBGA2-8]

Catalyst (CSI)
CAT24AC128
CAT24AC128 [SOIC8]
CAT24AC128 [TSSOP14]

Microchip
PIC18F24J10 (ISP)
PIC18LF24J10 (ISP)
PIC18F25J10 (ISP)
PIC18LF25J10 (ISP)
PIC18F44J10 (ISP)
PIC18LF44J10 (ISP)
PIC18F45J10 (ISP)
PIC18LF45J10 (ISP)
PIC18F4450
PIC18F4450 [TQFP44]
PIC18F4450 (ISP)
PIC18LF4450
PIC18LF4450 [TQFP44]
PIC18LF4450 (ISP)
PIC18F2450
PIC18F2450 [SOIC28]
PIC18F2450 (ISP)
PIC18LF2450
PIC18LF2450 [SOIC28]
PIC18LF2450 (ISP)

Micron
MT28F016S5VG [TSOP40]

Rohm
BR24L01AFVM [MSOP8]
BR24L02FVJ [TSSOP-B8J]
BR24L02FVM [MSOP8]
BR24L04FVM [MSOP8]
BR24L08FVM [MSOP8]
BR24L16FVM [MSOP8]
BR9020FV [SSOP8]
BR9020RFV [SSOP8]
BR9020RFVM [MSOP8]
BR9040FV [SSOP8]
BR9040RFV [SSOP8]
BR9040RFVM [MSOP8]
BR93L46RFVM-W [MSOP8]
BR93L56RFVM-W [MSOP8]
BR93L66RFVM-W [MSOP8]
BR93L76-W
BR93L76FJ-W [SOP-J8]
BR93L76RFJ-W [SOP-J8]
BR93L76F-W [SOP8]
BR93L76RF-W [SOP8]
BR93L76RFV-W [SSOP-B8]
BR93L76RFVT-W [TSSOP-B8]
BR93L76RFVJ-W [TSSOP-B8J]
BR93L76RFVM-W [MSOP8]
BR93L86-W
BR93L86FJ-W [SOP-J8]
BR93L86RFJ-W [SOP-J8]
BR93L86F-W [SOP8]
BR93L86RF-W [SOP8]
BR93L86RFV-W [SSOP-B8]
BR93L86RFVT-W [TSSOP-B8]
BR93L86RFVJ-W [TSSOP-B8J]
BR93L86RFVM-W [MSOP8]

Seiko Instruments
S-29U294A [SOP8]
S-29U294A [SSOP8]
S-29U394A [SOP8]
S-29U394A [SSOP8]
S-29191A
S-29191A [SOP8]
S-29291A
S-29291A [SOP8]
S-29391A
S-29391A [SOP8]
S-2914R (x16)
S-2914R (x8)

SGS-Thomson (STM)
M25P128-V [MLP8]
M25P128-V [SO16]

Spansion
S25FL016A [SOIC8]

Bug Fixes
27C64 and 27C040 programming bug fixed
Altera EP3xxx series, programming bug fixed
Atmel, AT27C(LV)520, bug fixed
Atmel, AT49F/LV/BV001/1T/2/2T, read/verify bug fixed
Elan, EM6580, programming bug at some programmers fixed
Hitachi, HN58C65(6), programming stability improved
Holtek, HT25LC512 [SOIC8], programming improved
Intel, 87C196CA, bug fixed
Lattice, LC4256ZC, ID code check bug fixed
Lattice/Vantis, M4xx-xx/xx (ISP), internal error bug fixed
Microchip, PIC18F(LF)45J10 programming bug fixed
Myson, MTV512GM [PDIP40], bug fixed
SiLabs, C8051F330, programming bug fixed
SST, SST34HF3284, programming bug fixed
SST, SST34HF1621C and SST34HF3284, erase procedure bug fixed
STM, M58LW032CN, programming procedure bug fixed
Xilinx, XC2Cxxx, programming of DONE bits bug fixed

Other Changes
Altera EP6xxx, Altera EPM7096, limit for overcurrent increased
Atmel, AVR, ISP system improved
Atmel, AT49BV002T/AT49BV002AT, programming improved
Dallas/Maxim, NVRAM DS1220, DS1225, power up/power down procedure improved
Microchip, dsPIC30F6011A, erase procedure and config programming bug fixed
Motorola/Freescale, MC68HC908Qxx, EY, KX, read/verify bug fixed
Motorola/Freescale, MC68HC705P9 bug fixed
NAND Flash handling improved
NEC, microcontrollers, FLASH type, ISP, programming improved
NS, COP8TAC9, programming stability increased
Philips, LPC2xxx series, programming speed increased
Philips/Signetics, PLS100/82S100, programming improved
ISP programming of some chips, additional information added
ISP, programming of some chips, target system supply voltage allowed for next chips

Best regards,

Daniel Smith

Return to “Software Update Notifications”

Who is online

Users browsing this forum: No registered users and 13 guests