Page 1 of 1
Adapter for Programming / Reading ST 65640 EEprom on S4
Posted: 10 Nov 2011 11:22
by Guest
Can you say my what a wiring für the Adaptorwiriing must i use it ?
Michael
Re: Adapter for Programming / Reading ST 65640 EEprom on S4
Posted: 10 Nov 2011 11:23
by Dataman (Neil Parker)
Hello Michael
I checked the S4 supported device list and the ST 65640 is not listed.
Are you sure the part name is correct?
Neil
Re: Adapter for Programming / Reading ST 65640 EEprom on S4
Posted: 10 Nov 2011 11:23
by Guest
Oh iss my mistake, the Name of the Ic ist NOT 65640
the Name ist 95640 form ST
Can i help you
Michael
Re: Adapter for Programming / Reading ST 65640 EEprom on S4
Posted: 10 Nov 2011 11:23
by Dataman (Neil Parker)
Michael
That is supported on the S4. You will need the Serial Module and library V3.21 which is on our website.
Neil
Re: Adapter for Programming / Reading ST 65640 EEprom on S4
Posted: 10 Nov 2011 11:23
by Guest
That is correct, this is not the answer of my question
The S4 prommer say "use Adaptor", whitch wiring für the Adaptor must i use it ?
In the Textfile ( DOC ) from Serial Module ist ONLY wirering for 17C,xx;24cxx; 25,xx; 93Cxx; and other.
The ST95xxx Typ have NOT an Adaptor wirering, in the DOC list
Whitch Pins from the ST95640 must by connectet whis the Pin of the S4 prommer ( ADAPTOR )?
Michael
Re: Adapter for Programming / Reading ST 65640 EEprom on S4
Posted: 10 Nov 2011 11:23
by Dataman (Neil Parker)
Michael,
The 95 series uses the same pins as the 25 series device.
Neil