How to program cyble-012011-00 efficiently in large quantities?

General topics relating to devices and programming
Thurman1974
Posts: 1
Joined: 22 Sep 2020 05:54
Contact:

How to program cyble-012011-00 efficiently in large quantities?

Postby Thurman1974 » 26 Oct 2020 06:05

With the increase in production, we need to program the CYBLY-012011-00 board more efficiently. We are now using CY8CKIT-042 for system programming CyBLY-012011-00. So the first idea was to make CyLab-012011-00 pre-programmed before installation on the PCB, but I did not find any information about this from the web. Can anyone give some suggestions? Thank you.

Dataman (Neil Parker)
Posts: 931
Joined: 10 Nov 2011 09:51

Re: How to program cyble-012011-00 efficiently in large quantities?

Postby Dataman (Neil Parker) » 12 Nov 2020 11:15

Hello Thurman1974,

Unfortunately we are not aware of any socket manufacturers that offer a ZIF socket for this style of "package", it seems that there is simply no way to apply even pressure from above in order to achieve reliable contact between the socket below and device pads.
Capture.PNG
Capture.PNG (52.27 KiB) Viewed 3731 times
For now the recommendation is to program these devices in circuit. Sorry.

Best regards,


Neil Parker
Dataman Programmers


Return to “Devices and Programming”

Who is online

Users browsing this forum: No registered users and 1 guest