New software - Version 3.64

Software update notifications
Dataman (Daniel Smith)
Posts: 2254
Joined: 09 Nov 2011 14:36

New software - Version 3.64

Postby Dataman (Daniel Smith) » 15 Jan 2021 12:50

Dear Dataman users,

New software has just been posted on our software pages for the Dataman PIKPro PICmicro ISP programmer.

Version 3.64 features the following amendments:

New Device Support
Many new devices have been added in this revision, please download the full device list to verify your chip is supported: DatamanPIKProDeviceList.pdf

Major Changes
Added new C#.NET remote control examples for Microsoft Visual Studio .NET
Added scrollbar to About dialog's language version author contacts, for better readability of the contact (address) information

Other Changes
AMD Am29F016D, programming procedure modification
Analog Devices/Linear Technology LTC388x, add ID check feature
Atmel/Microchip ATtiny3216/3217, TOUTDIS checkbox logic changed. Checked = 0, unchecked = 1
Atmel/Microchip ATxmega family ISP, Error code information added when communication error occures
Cypress (ex Spansion) S34xxx NAND flash memories, One Time Programmable (OTP) area support added
Cypress/Spansion S29GL032NxxTxx01 [TSOP56], power-up sequence modified
Dallas/Maxim DS2502/DS2505/DS2506, Programming procedure optimized
Dallas/Maxim DS2505, added support of Bitmap of Used Pages
GigaDevice GD32, CPU core halting procedure modified
Infineon TLE9842-2QX [VQFN48](FastLIN BSL), verification procedure modified
Infineon/IR IR358x, improving of scan I2C address
Macronix MX25L51273Gxx-08 [SOP16] (Quad I/O), changed device name and backward project compatibility
Micron MT25Q 128Mbit devices, Extended device ID check
Micron MT25Q 256Mbit/512Mbit/1Gbit/2Gbit devices, Extended device ID check
Micron MT25QU256ABA1E [DFN8 8x6] (Quad I/O), Extended device ID check
Micron MT29F8G08ADAFAWP-AAT [TSOP48] (EPS-22), custom algorithm parameters modified according to cross-analysis results
Renesas M30626FHPGP, programming and verify procedure modified
Scenix/Ubicom devices, device info modified
STMicroelectronics STM32, CPU core halting procedure modified
STMicroelectronics STM32L562 [UFBGA132], programming algorithm modifications
TI (TMS) UCD9081, improving of programming procedure

Bug Fixes
Atmel/Microchip ATtinyxx4/xx6/xx7, fuse verification error displayed in hexadecimal instead of decadic
Cypress CYPD4126-40LQXI [QFN40], insertion test bug fixed
ESMT F50L2G41XA [WSON8], package type fixed according to datasheet change (was LGA8)
Fairchild NM93Cx6T [TSSOP8], wrong adapter bug fixed
Freescale Semic./NXP MC9S12G128 [LQFP64], internal error bug fixed
GigaDevice GD32E230GxU, wrong adapter bug fixed
GigaDevice GD32F150GxU [QFN28], overcurrent problem fixed
Huahong BH25Q128AS [SOP8-208], device size fixed
Infineon SAK_TC3xxxx-xxxxxx devices, erasing UCB_BHMD bug fixed
Lattice LCMXO3L-9400E [caBGA256], LCMXO3LF-9400E [caBGA256], adapter assignment bug fixed
Microchip PIC18F27Q10, Device ID check bug fixed
MPS MP2940A, check of revision ID bug fixed
NXP/Freescale Semic. MKS22FN256xxx12 [LQFP64], AutomaticYes! bug fixed
Renesas R5F21368SxFP, 'Unexpected error 1 [IEC:1, D:16]!' bug fixed
STMicroelectronics ST7UD05, ST72Cxxxxxx, ST72Txxxxxx, internal error bug fixed
TI CC2538xxx [QFN56] and CCC2538xxx (ISP-UART), programming CCA bytes bug fixed
TI (TMS) MSP432xxx devices, added support of Factory Reset
TI (TMS) TMS320F2837xS, selection bug of programming DCSM OTP Bank 0 fixed

Best regards,

Daniel Smith

Return to “Software Update Notifications”

Who is online

Users browsing this forum: No registered users and 0 guests