Programming ATF16V8 no longer works in v3.70

Topics related to the Dataman 40Pro
mypinballs
Posts: 14
Joined: 09 Sep 2020 08:12

Programming ATF16V8 no longer works in v3.70

Postby mypinballs » 22 Oct 2021 12:14

As titled after upgrading to v3.70 the programming of ics like Atmel ATF16V8 etc ics no longer works.

The error mentioned is: Unexpected Error 1 Contact Manufacturer of programmer

Screenshot also attached.

I've had to go back to v3.61

Screenshot 2021-10-19 at 19.37.37.jpg

mypinballs
Posts: 14
Joined: 09 Sep 2020 08:12

Re: Programming ATF16V8 no longer works in v3.70

Postby mypinballs » 25 Oct 2021 16:13

Any reply on whether this can be fixed soon?

Dataman (Neil Parker)
Posts: 931
Joined: 10 Nov 2011 09:51

Re: Programming ATF16V8 no longer works in v3.70

Postby Dataman (Neil Parker) » 26 Oct 2021 08:47

Hello,

Apologies for the delay in responding. Can you confirm that the programmer model is the Dataman-40Pro and can you also confirm the result of the "Selftest..." from the Programmer menu using the diagnostic pod?

Best regards,

Neil Parker
Dataman Programmers

mypinballs
Posts: 14
Joined: 09 Sep 2020 08:12

Re: Programming ATF16V8 no longer works in v3.70

Postby mypinballs » 28 Oct 2021 14:57

Yes the programmer is a 40 Pro (upgraded from a MEM Pro) serial 578-03481

I will run the diagnostic test thing but i know these ics program fine in the earlier software as i using 3.61 again and its working fine.

Dataman (Neil Parker)
Posts: 931
Joined: 10 Nov 2011 09:51

Re: Programming ATF16V8 no longer works in v3.70

Postby Dataman (Neil Parker) » 29 Oct 2021 10:22

Hello,

We have improved the code for the mentioned device.

Please download, install and use the latest OnDemand software:
URL: https://www.dataman.com/mwdownloads/dow ... nk/id/202/
Version: 3.71h/10.2021

Sorry for this inconvenience.

Best regards,


Neil Parker
Dataman Programmers

mypinballs
Posts: 14
Joined: 09 Sep 2020 08:12

Re: Programming ATF16V8 no longer works in v3.70

Postby mypinballs » 29 Oct 2021 10:42

Excellent :)


Return to “Dataman 40Pro”

Who is online

Users browsing this forum: No registered users and 4 guests