New software - Version 3.71
Posted: 01 Nov 2021 15:24
Dear Dataman users,
New software has just been posted on our software pages for the Dataman 48Pro2AP super fast industrial universal programmer.
Version 3.71 features the following amendments:
New Device Support
Many new devices have been added in this revision, please download the full device list to verify your chip is supported: Dataman48Pro2APDeviceList.pdf
Major Changes
Display "In circuit programming" dialogs fixed for remote control
Other Changes
Added module: AP1 BGA-0620/0581
Added module: AP1 QFN32-1 ZIF-CS
Added module: AP1 QFN40-2.02 ZIF ISL-2
Added module: AP1 QFN44-1.02 ZIF XRP-1
Added module: AP1 QFN8-9 ZIF SFlash-1b
Added module: AP1 QFP64-1.02 ZIF R7FA-1
Atmel AT32UC3A/UC3B family, Blank check procedure stability improved
Azoteq IQS211x, IQS231x, add recognition of .iqs file
Infineon XMC14xx [VQFN48], added support
Intel/Altera 10M02DC [WLCSP36], device info improved, adding of package modification information
ISSI IS25WP512M-RH [TFBGA24], added support
Lattice MachXO/MachXO2/MachXO3/MachXO3D, device info improved, adding of erase before programming information
Macronix MX25L25645GXD, improved Protected memory options display
Macronix MX25Lxxx/MX25Uxxx/MX66Lxxx/MX66Uxxx family, displaying of information about Verifying Registers - error! improved
Microchip dsPIC33CK256MP205, verification mask for CFG improved
Microchip PIC18FxxQ43, load/save hex file improved
Microchip PIC32CM series, custom HEX file load procedure added
MPS MP2975, MP2978, added recognition of different type .txt file
NEC/Renesas uPD78F0988A, power-up sequence modified
Puya Semiconductor P25Qxxx/PY25Qxxx family, displaying of information about Verifying Registers - error! improved
Renesas M38039FF (ISP-UART), power-up and recommended connection modified
Renesas R7F701071xx (ISP-SPI), description of ISP connector pins improved
Renesas R7FS5D97CxA01CLK [LGA145](EPS), programming modified
Renesas/Intersil ISL69259, programming adapter/module changed
STMicroelectronics BlueNRG-232, programming procedure improved + added independent programming option for readout protection
STMicroelectronics STM32H7xx, algorithms modified due to support devices with gap between Flash banks
TI (TMS) TM4C123xxx in LQFP64, LQFP100, LQFP144, programming operation speed-up
TI (TMS) UCD90xxx (D), UCD92xx (D), reliability of read improved
Bug Fixes
Nuvoton ML51TB9AE and ML51PB9AE, ID check bug fixed
STMicroelectronics M29DW128G [TSOP56], insertion test bug fixed
STMicroelectronics STM32H7xx (ISP-xxx), fixed program parallelism voltage minimum value (to 1.8V)
Best regards,
Daniel Smith
New software has just been posted on our software pages for the Dataman 48Pro2AP super fast industrial universal programmer.
Version 3.71 features the following amendments:
New Device Support
Many new devices have been added in this revision, please download the full device list to verify your chip is supported: Dataman48Pro2APDeviceList.pdf
Major Changes
Display "In circuit programming" dialogs fixed for remote control
Other Changes
Added module: AP1 BGA-0620/0581
Added module: AP1 QFN32-1 ZIF-CS
Added module: AP1 QFN40-2.02 ZIF ISL-2
Added module: AP1 QFN44-1.02 ZIF XRP-1
Added module: AP1 QFN8-9 ZIF SFlash-1b
Added module: AP1 QFP64-1.02 ZIF R7FA-1
Atmel AT32UC3A/UC3B family, Blank check procedure stability improved
Azoteq IQS211x, IQS231x, add recognition of .iqs file
Infineon XMC14xx [VQFN48], added support
Intel/Altera 10M02DC [WLCSP36], device info improved, adding of package modification information
ISSI IS25WP512M-RH [TFBGA24], added support
Lattice MachXO/MachXO2/MachXO3/MachXO3D, device info improved, adding of erase before programming information
Macronix MX25L25645GXD, improved Protected memory options display
Macronix MX25Lxxx/MX25Uxxx/MX66Lxxx/MX66Uxxx family, displaying of information about Verifying Registers - error! improved
Microchip dsPIC33CK256MP205, verification mask for CFG improved
Microchip PIC18FxxQ43, load/save hex file improved
Microchip PIC32CM series, custom HEX file load procedure added
MPS MP2975, MP2978, added recognition of different type .txt file
NEC/Renesas uPD78F0988A, power-up sequence modified
Puya Semiconductor P25Qxxx/PY25Qxxx family, displaying of information about Verifying Registers - error! improved
Renesas M38039FF (ISP-UART), power-up and recommended connection modified
Renesas R7F701071xx (ISP-SPI), description of ISP connector pins improved
Renesas R7FS5D97CxA01CLK [LGA145](EPS), programming modified
Renesas/Intersil ISL69259, programming adapter/module changed
STMicroelectronics BlueNRG-232, programming procedure improved + added independent programming option for readout protection
STMicroelectronics STM32H7xx, algorithms modified due to support devices with gap between Flash banks
TI (TMS) TM4C123xxx in LQFP64, LQFP100, LQFP144, programming operation speed-up
TI (TMS) UCD90xxx (D), UCD92xx (D), reliability of read improved
Bug Fixes
Nuvoton ML51TB9AE and ML51PB9AE, ID check bug fixed
STMicroelectronics M29DW128G [TSOP56], insertion test bug fixed
STMicroelectronics STM32H7xx (ISP-xxx), fixed program parallelism voltage minimum value (to 1.8V)
Best regards,
Daniel Smith