New software - Version 3.72

Software update notifications
Dataman (Daniel Smith)
Posts: 2263
Joined: 09 Nov 2011 14:36

New software - Version 3.72

Postby Dataman (Daniel Smith) » 29 Nov 2021 10:47

Dear Dataman users,

New software has just been posted on our software pages for the Dataman 448Pro2AP super fast industrial gang programmer.

Version 3.72 features the following amendments:

New Device Support
Many new devices have been added in this revision, please download the full device list to verify your chip is supported: Dataman448Pro2APDeviceList.pdf

Major Changes
Buffer/Fill random, Buffer/Erase, action took place even on pressing Esc, fixed

Other Changes
Added module: AP1 BGA100-1.02 ZIF eMMC-1
Added module: AP1 BGA144-9 ZIF STM32-1
Added module: AP1 QFN32-1.02 ZIF FL-1
Added module: AP1 QFP128-1.02 ZIF M16C-1
Added module: AP1 QFP144 ZIF STM32-2 (LD)
Added module: AP1 QFP48 ZIF STM32-3 (LD)
Added module: AP1 SOT23-6 ZIF TP-2
Atmel/Microchip AT89LP52 (ISP), added new feature 'Level of POL signal' to device option
Atmel/Microchip ATSAMC20/ATSAMC21 series, device ID codes revised
Cypress S26KL/S26KS/S26HL/S26HS series, verification procedure modified
eMMC devices, Erase operation improved
Epson S1C17611 [QFP12-48], Erase procedure modified
Fresco Logic FL7102-2Q0 [QFN40], Verifying device modified
GigaDevice GD25LB512ME [SOP16], verify procedure modified
GigaDevice GD25Q80E [SOP8-150], setting Protected memory modified
Infineon SAF-XE164H-96Fxxx [LQFP100], IDcheck procedure modified
ISSI IS25WP032D-J [USON8 4x3] (Quad I/O), IS25WP032D-J [USON8 4x3], added support for 48Pro2AP, 448Pro2AP, 448Pro2AP-AU
Microchip ATmega808/809/1608/1609/3208/3209/4808/4809 in ZIF, Power on sequence modified, stability issues
Microchip AVR UPDI devices, error message when device is locked and erase procedure modified
Microchip/Atmel AT24C128C, reading device improved stability improved
Microchip AVR32 UC3A and UC3B family, Blank check modified
Microchip PIC18F6xK22, power-on procedure improved
Micron MT35XU01GBBA1G12 [T-PBGA24] (Octa I/O), power up sequence improved
Micron MTFC8GAMALBH [TFBGA153], added programming options for Extended CSD register
MPS MP2975/8, programming procedure improved
NAND flash devices, unified way of working with different types of permanent block protection
NEC uPD78F9842 [QFP44](UART), initialization procedure improved
NEC/Renesas uPD70F3524, verification procedure improved
Nuvoton NUC1xx series, file load procedure improved
Puya Semiconductor P25Q80H [SOP8-150] (Quad I/O), added support for 48Pro2AP, 448Pro2AP, 448Pro2AP-AU and read operation improved
Renesas R7F701442xxFB [LQFP176], R7F701400 [LQFP100], programming procedure for DFM improved
Silicon Laborat. EFM8BB2x, EFM8BB3x, EFM8LB1x, EFM8UB1x, EFM8UB3x, verify procedure improved
SPI EEPROM (ISP), changed of information about WP\ pin level detected in L
STMicroelectronics STM32F09x, Option bytes blank check modified (to accept production state as the blank)

Bug Fixes
AP1 SOT23-6 ZIF TP-2, fixed incorrect checking of serial number
Atmel/Microchip AT89LP52 (ISP), supply voltage range bug fixed
Atmel/Microchip ATSAMC21J18A [WLCSP56], ID check error bug fixed
Freescale Semic., NXP MC9S12Bxxx, fixed bug in Device info - section "Buffer data layout description"
Iflytek HD2886D [QFN48], programming algorithm bug fixed
Macronix MX28F2100B [TSOP48], programming bug fixed
Microchip ATmega808/809/1608/1609/3208/3209/4808/4809 in ZIF, power on sequence bug fixed
Microchip AVR UPDI devices, inability to disable CRC check bug fixed
Microchip dsPIC33EP256GMxxx, programming bug of the User ID locations fixed
Micron MT35XU01GBBA1G12 [T-PBGA24] (Octa I/O), verify error fixed
NXP MCF5281 [MAPBGA256], AutomaticYES! bug fixed
Renesas R5F72543RKBGV [BGA272], Boot mode 'Data area' erase bug fixed
Renesas R7F701071xxFP [LQFP144], verifying Device Settings bug fixed
STMicroelectronics BlueNRG-232, programming procedure bug fixed
STMicroelectronics STM32L5xx, erase procedure bug fixed
STMicroelectronics STM8AF6226TxSSS, programming procedure bug fixed

Best regards,

Daniel Smith

Return to “Software Update Notifications”

Who is online

Users browsing this forum: No registered users and 4 guests