Dear Dataman users,
New software has just been posted on our software pages for the Dataman 448Pro2AP-AU gang programmer with built-in actuation unit.
Version 3.73 features the following amendments:
New Device Support
Many new devices have been added in this revision, please download the full device list to verify your chip is supported: Dataman448Pro2AP-AUDeviceList.pdf
Major Changes
HEX file load, range of addresses listing fixed
Modified detection of the operating system version (for Windows 11)
Other Changes
Added module: AP1 BGA100-5.01 ZIF STM32G4-1
Added module: AP1 BGA24-3 ZIF HFlash-1
Added module: AP1 QFP64-1.01 ZIF NUC-8
Added module: AP1 SOIC8 ZIF CY-2
Atmel/Microchip AT32UC3L0128A [WLCSP49], device info modified
Atmel/Microchip AT90CAN128 and AT90USB1286/1287 in QFP64 and QFN64 package, device info modified
Atmel/Microchip ATmega1280/1281 series in QFP100 and CBGA100 package, device info modified
Atmel/Microchip ATmega128RFA1 [QFN64], device info modified
Atmel/Microchip ATmega165/169/325/329/645/649 series in QFP64 and MLF64 package, device info modified
Atmel/Microchip ATmega3250/6450/3290/6490 series in QFP100 package, device info modified
Atmel/Microchip ATmega48/88/168/328/P/PB (ISP-SPI), fuse bits programming procedure modified
Atmel/Microchip ATmega64/128 [QFP64], device info modified
Atmel/Microchip ATmega808/1608/3208/4808 [QFN32], package drawing updated
Atmel/Microchip ATSAMD20/D21/D10/D11/D09/DA1/C20/C21/HA1/R21/L21/L22/R34/R35/R30 series, loading of the UROW config bits from input hex file added
Atmel/Microchip ATSAMHA1 series, support for RWW area added
Atmel/Microchip ATxmega64B1/128B1 [VFBGA100], automatic yes parameters and device info modified
Cypress/Spansion S70FL01GSxxBxxC1 [BGA24] (QuadSPI), solo verification procedure improved
Elmos E520.24, change device name to E520.24A0
Fudan Microelect. FM25Q08B [SOP8-150], FM25Q16A, setting Protected memory modified
GigaDevice GD25Q80E [SOP8-150], verifying status register modified
GigaDevice GD25Q16C, GD25Q16E, setting Protected memory modified
Lattice ispPAC-POWR604/1208/1208P1, improving of pgm parameters according to the actual pgm spec
Lattice ispLSI1048EA [TQFP128], ispLSI2096E [TQFP128], improving of pgm parameters assignment
Macronix MX66U2G45GXRx00 [BGA24] (Quad I/O), changed device name and backward project compatibility
Microchip PIC12F1822, PIC16F1828, hex file load improved
Microchip PIC18F57Q43, PIC18F57Q83, PIC18F57Q84, added support
Microchip PIC24FJ256GB410, load/save hex file improved
Nordic nRF52xx, erasing algorithm improved
Nuvoton M482ZGCAE [QFN33], programming config bytes procedure improved
NXP MKV5xF1M0xLL24, load HEX file modified
Renesas R5F566xxxxFP, programming modified
Renesas R7F701400, R7F701442, programming DFM improved
Samsung KLMAG1JETD-B041 [FBGA153], added option "Adjust(if necessary) the parameter Device end automatically (according to PRV info read from the device)"
S26KL/S26KS/S26HL/S26HS HyperFlash series, logging of the devices Random Number added
S26KL/S26KS/S26HL/S26HS HyperFlash series, options for erase of non-volatile registers added
STMicroelectronics STM8AF6226, STM8AF6226TxSSS, add recognize of programming block size
TI (TMS) MSP430F235 [LQFP64], added skipping verify TLV during solo verify
TI (TMS) TPS40422, add special settings for ignore error(s)
Toshiba TC57256D, programming algorithm modified
XMC XM25QH80B, setting Protected memory modified
Bug Fixes
Adesto Techn. AT25PE16 [SOIC8-150], Unexpected error 1 [IEC:1, D:01]! fixed
Analog Devices ADUCM310, ADUCM320, reading device bug fixed
Atmel/Microchip ATmega328PB (ISP-SPI), programming the CFD fuse bit error bug fixed
Atmel/Microchip ATxmega64B1/128B1 [VFBGA100], pinout bug fixed
Lattice MachXO3D, load/save project bug fixed
Microchip PIC16F/LF15313, PICmicro checksum calculation bug fixed
S26KL/S26KS HyperFlash series, fixed read operation bug
STMicroelectronics STM32G0xx Device access configuration address range error bug fix
STMicroelectronics STM8TL5xxxx, power up sequence bug fixed
Best regards,
Daniel Smith
New software - Version 3.73
Software update notifications
-
- Posts: 2264
- Joined: 09 Nov 2011 14:36
Return to “Software Update Notifications”
Jump to
- Dataman Products
- Programmers
- Dataman 40Pro
- Software Update Notifications
- Dataman S6
- Software Update Notifications
- Dataman 48Pro2C
- Software Update Notifications
- Dataman 48, 48LV, 48XP and 48UXP
- Software Update Notifications
- Dataman 48Pro2
- Software Update Notifications
- Dataman 48Pro2AP
- Software Update Notifications
- Dataman 448Pro2
- Software Update Notifications
- Dataman 448Pro2AP
- Software Update Notifications
- Dataman 848 and 848XP
- Software Update Notifications
- Dataman 848Pro2
- Software Update Notifications
- Dataman S3
- Dataman S4
- Software Update Notifications
- Dataman 48Pro
- Software Update Notifications
- Dataman 48Pro+
- Software Update Notifications
- Dataman 448Pro
- Software Update Notifications
- Dataman 448Pro+
- Software Update Notifications
- Dataman 448Pro2AP-AU
- Software Update Notifications
- Dataman 848Pro
- Software Update Notifications
- Dataman MEMPro
- Software Update Notifications
- Dataman PIKPro
- Software Update Notifications
- Dataman T51Pro
- Software Update Notifications
- Other Dataman Programmers
- Oscilloscopes
- Dataman 520 Series
- Software Update Notifications
- Dataman 570 Series
- Software Update Notifications
- Dataman 770 Series
- Software Update Notifications
- Waveform Generators
- Dataman 530 Series
- Software Update Notifications
- Validators
- Dataman Vali-Flash
- Dataman Vali-File
- Dataman S4 Validator
- Software Update Notifications
- Other Dataman Products
- Dataman
- Devices and Programming
- General Conversation
- Refurbished Dataman Products
- Programmers
- Other Dataman Products
Who is online
Users browsing this forum: No registered users and 35 guests