Man/Dev ID Error trying to program Lattice GAL22V10D with v3.82

Topics related to the Dataman 40Pro
mad3001_01
Posts: 3
Joined: 17 Jan 2023 19:54

Man/Dev ID Error trying to program Lattice GAL22V10D with v3.82

Postby mad3001_01 » 17 Jan 2023 20:01

Hello, I was trying to program some Lattice GAL22V10D with the programmer dataman 40pro and PG4UW v3.82 but is like it does not detect the chip. When I try any operation (Erase, Read, Program) it says Manufacturer FFh and ID Device FFh.
I did the selftest and all is ok. I tried to read EPROM SST39SF040 and it did it correctly.
I can erase/read/program the same GAL22V10D into an G840 so the problem is not in the chips.
BR
Mario

Dataman (Neil Parker)
Posts: 931
Joined: 10 Nov 2011 09:51

Re: Man/Dev ID Error trying to program Lattice GAL22V10D with v3.82

Postby Dataman (Neil Parker) » 18 Jan 2023 10:55

Hello Mario,

Can you recreate the situation you describe and then generate a problem report using the Help > Create problem report feature and email it to me for analysis? [email protected]

If you can also provide a photo of the top of the device where the part name is visible, it would be helpful.

Best regards,

Neil Parker
Dataman Programmers

mad3001_01
Posts: 3
Joined: 17 Jan 2023 19:54

Re: Man/Dev ID Error trying to program Lattice GAL22V10D with v3.82

Postby mad3001_01 » 21 Jan 2023 06:38

Email sent to you.
Thanks in advance.


Return to “Dataman 40Pro”

Who is online

Users browsing this forum: No registered users and 4 guests