New software - Version 3.84

Software update notifications
Dataman (Daniel Smith)
Posts: 2254
Joined: 09 Nov 2011 14:36

New software - Version 3.84

Postby Dataman (Daniel Smith) » 29 Mar 2023 15:33

Dear Dataman users,

New software has just been posted on our software pages for the Dataman MEMPro universal memory programmer.

Version 3.84 features the following amendments:

New Device Support
Many new devices have been added in this revision, please download the full device list to verify your chip is supported: DatamanMEMProDeviceList.pdf

Major Changes

Other Changes
Altera EPCQ256/EPCQL256/EPCQL1024, device info updated
Atmel/Microchip ATmega3208/3209/4808/4809 family, Power-on sequence modified, stability tuned
Atmel/Microchip ATtinyxx4/xx6/xx7 devices using UPDI, power on sequence modified
Atmel/Microchip ATtinyxx4/xx6/xx7 families using UPDI, stability tuned
Microchip AVR DA/DB family, Power-on sequence modified, stability tuned
Microchip dsPIC33CK64MP102, programming CFG bits and Start-Up sequence improved
Renesas R5F562TAxxFP, power-up modified
Serial NAND Flash devices, Redirection with HW Look Up Table (LUT) / Redirection with Bad Block Management Function (BBMF) mode improved - added support for SpiStack devices and for devices with more than 1 table on single chip (needs hardware support in device)
Silicon Laborat. EFR32BG1Bxxx, EFR32BG1Vxxx, EFR32BG1Pxxx, EFR32FG1Pxxx, EFR32FG1Vxxx, EFR32MG1Bxxx, EFR32MG1Pxxx, EFR32MG1Vxxx, power-up sequence modified
STMicroelectronics STM32H745ZI in ISP mode, programming speed improvement
Texas Instruments RM4x devices, initialization procedure improved
Winbond W25Q40EW [SOIC8-150], added adapter DIL8W/SOIC8 ZIF 150mil SFlash-1b

Bug Fixes
Atmel/Microchip ATtinyxx4/xx6/xx7 devices using UPDI, Erase bug fixed in certain fuse settings
Cypress CY8C4014PVI-422 [SSOP28], insertion test bug fixed
Espressif ESP32-WROVER-E-N8Rx, ESP32-WROVER-E-N4Rx, ESP32-WROVER-E-N16Rx, programming procedure bug fixed
Intersil/Zilker Labs ZL2106, verification bug fixed
Motorola, Freescale Semic., NXP MC68HC705C8A, C9A QFP44, bug fixed
Nuvoton MS51xxx, ML51xxx, programming procedure bug fixed
NXP/Freescale Semic. MK10DXxxxxxx, insertion test bug fixed
Spansion S98FL512SxxMxxG0 [SO16] (Dual-Quad I/O), Verifying Status and Configuration Register - error! fixed
STMicroelectronics STM32G0xx and STM32C0xx, error "SWJDP communication problem!" fixed when programming BOOT_LOCK with RDP Level 1

Best regards,

Daniel Smith

Return to “Software Update Notifications”

Who is online

Users browsing this forum: No registered users and 0 guests