New software - Version 3.84

Software update notifications
Dataman (Daniel Smith)
Posts: 2254
Joined: 09 Nov 2011 14:36

New software - Version 3.84

Postby Dataman (Daniel Smith) » 29 Mar 2023 15:36

Dear Dataman users,

New software has just been posted on our software pages for the Dataman 448Pro2 super fast universal ISP gang programmer.

Version 3.84 features the following amendments:

New Device Support
Many new devices have been added in this revision, please download the full device list to verify your chip is supported: Dataman448Pro2DeviceList.pdf

Major Changes

Other Changes
Added adapter: DIL48/BGA330-1 ZIF LTM-1
Added adapter: DIL8/BGA8-29 ZIF
Added adapter: DIL48/QFN24-1.02 ZIF RTQ-1
Added adapter: DIL48/QFN64-3.02 ZIF TPS-1
Added adapter: DIL48/QFP100-1.02 ZIF PLD-27
Added adapter: DIL48/QFP128-1.02 ZIF CY-3
Added adapter: DIL48/QFP80-1.02 ZIF HD64-19
Added adapter: DIL48/QFP80-1.03 ZIF-CS MN101-4
Adapter DIL48/QFP64 ZIF MB96-6, interface update
Adapter DIL48/VTLA36 ZIF PIC-1, identification of programming adapter improved
Altera EPCQ256/EPCQL256/EPCQL1024, device info updated
Analog Devices ADUC7026xxxx62 [LQFP80], programming procedure modified
Atmel/Microchip ATmega3208/3209/4808/4809 family, Power-on sequence modified, stability tuned
Atmel/Microchip ATtinyxx4/xx6/xx7 devices using UPDI, power on sequence modified
Atmel/Microchip ATtinyxx4/xx6/xx7 families using UPDI, stability tuned
ISSI IS25WP064A-J [USON8 4x3], added adapter DIL8/QFN8-9 ZIF SFlash-1b
Lattice ispLSI2128VE [TQFP100], improving of overcurrent protection system
Microchip AVR DA/DB family, Power-on sequence modified, stability tuned
Microchip dsPIC33CK64MP102, programming CFG bits and Start-Up sequence improved
Micron MT25QU256ABA8E12-0 [TBGA24] (Quad I/O), MT25QL256ABA8E12-0 [TBGA24] (Quad I/O), MT25QL128ABA8E12-0 [TBGA24] (Quad I/O), Micron MT25QL128ABA8E12-0[TBGA24](Quad I/O)(EPS-1), changed device name and backward project compatibility
Panasonic MN101CF97DXW [LQFP48], power-up sequence improved
Renesas R5F562TAxxFP, power-up modified
Renesas R7F701462xxFB [LQFP176], programming DFM improved
Serial NAND Flash devices, Redirection with HW Look Up Table (LUT) / Redirection with Bad Block Management Function (BBMF) mode improved - added support for SpiStack devices and for devices with more than 1 table on single chip (needs hardware support in device)
Silicon Laborat. EFR32BG1Bxxx, EFR32BG1Vxxx, EFR32BG1Pxxx, EFR32FG1Pxxx, EFR32FG1Vxxx, EFR32MG1Bxxx, EFR32MG1Pxxx, EFR32MG1Vxxx, power-up sequence modified
STMicroelectronics STM32H745ZI in ISP mode, programming speed improvement
Texas Instruments RM4x devices, initialization procedure improved
TI (TMS) LMK05318, power-up procedure modified
TI (TMS) MSP430FR2433 [VQFN24](JTAG)(STz), programming procedure improved
Winbond W25Q40EW [SOIC8-150], added adapter DIL8W/SOIC8 ZIF 150mil SFlash-1b

Bug Fixes
Atmel/Microchip ATtinyxx4/xx6/xx7 devices using UPDI, Erase bug fixed in certain fuse settings
Cypress CY8C4014PVI-422 [SSOP28], insertion test bug fixed
Espressif ESP32-WROVER-E-N8Rx, ESP32-WROVER-E-N4Rx, ESP32-WROVER-E-N16Rx, programming procedure bug fixed
Intersil/Zilker Labs ZL2106, verification bug fixed
Motorola, Freescale Semic., NXP MC68HC705C8A, C9A QFP44, bug fixed
Nuvoton MS51xxx, ML51xxx, programming procedure bug fixed
NXP/Freescale Semic. MK10DXxxxxxx, insertion test bug fixed
Spansion S98FL512SxxMxxG0 [SO16] (Dual-Quad I/O), Verifying Status and Configuration Register - error! fixed
STMicroelectronics STM32G0xx and STM32C0xx, error "SWJDP communication problem!" fixed when programming BOOT_LOCK with RDP Level 1

Best regards,

Daniel Smith

Return to “Software Update Notifications”

Who is online

Users browsing this forum: No registered users and 1 guest