New software - Version 3.90

[Dataman (Daniel Smith)]

Dear Dataman users,

New software has just been posted on our software pages for the Dataman 448Pro2AP-AU gang programmer with built-in actuation unit.

Version 3.90 features the following amendments:

New Device Support
Many new devices have been added in this revision, please download the full device list to verify your chip is supported: Dataman448Pro2AP-AUDeviceList.pdf

Major Changes

Other Changes
Added module: AP1 QFP64 ZIF STM32G4-1
Added module: AP1 WLCSP49-1.1 ZIF STM32-2
Analog Devices/Linear Technology LTC3880, LTC3880-1, added support of solo verification
Atmel/Microchip AT21CS01/11, communication parameters modified
Atmel/Microchip ATSAMG55G19A [WLCSP49], power-up sequence improved
Atmel AVR8 devices in MLF package, added new package numbering
Cypress CY8C6, CYT2 and CYT3 family, adjust the buffer range
Microchip AVR8 devices in MLF package, modified package names to current form
Macronix MX66UM1G45G (Octa I/O), Alt+S menu improved
Micron MT25QL256ABA8E [SO16W] (Quad I/O), verification improved
Micron MT25QLxxx, MT25QUxxx, MT25TLxxx, verification improved
Micronas HAL805, HAL830, Alt+s window modified, added interactions with supply voltage value
Nordic nRF5xxx, modified location for save DEVICEID and DEVICEADDR to CSV file
Realtek RTL8721DFL, programming procedure improved
Renesas R7F701404xxFB, programming option bytes improved
Renesas R7F701651xxBG, added default value for OPBT0-1
Spansion S29AL016JxxTxx01 [TSOP48], programming procedure modified
STMicroelectronics EPROM's suffixes descriptions modified
STMicroelectronics STM32G0xx, STM32C0xx, RDP Protection Level 1 default value changed
STMicroelectronics STM32G431RBT [LQFP64], STM32G473RET [LQFP64], STM32G474RCT [LQFP64], STM32G474RCT [LQFP64], added support for module AP1 QFP64 ZIF STM32G4-1
TI (TMS) TPS53622, TPS53622A, added support of solo verification
TI (TMS) TPS53622, added NVM checksum info from device to LOG
TI (TMS) TPS53689/C9, verification improved
TI (TMS) TPS544C26, csv file processing improved
Toshiba THGBM5G5A1JBAIR [VFBGA153], added Read Erase Count function
Winbond W25Q16JVxxxQ [USON8 4x3], added support
Winbond W25Qxxx USON8 4x3, added support

Bug Fixes
Geehy APM32, File size, File start and File end information display fixed after file load (*.BIN, *.MOT)
GigaDevice GD32, File size, File start and File end information display fixed after file load (*.BIN, *.MOT)
Gowin Semicond. GW1N-UV9 [QN48](rev C), programming bug fixed
Infineon IMC101T-T038, progressbar bug fixed
MindMotion MM32, File size, File start and File end information display fixed after file load (*.BIN, *.MOT)
Motorola/Freescale Semic./NXP HC(S)12 family, reconnect dialog during ERASE operation - bug fixed
STMicroelectronics STM32, File size, File start and File end information display fixed after file load (*.BIN, *.MOT)
STMicroelectronics STM32G0xx, FLASH_SECR register setting bug fixed
TI (TMS) CC13xx, CC25xx, CC26xx, initialization procedure bug fixed

Best regards,

Daniel Smith