New software - Version 3.09

Software update notifications
Dataman (Daniel Smith)
Posts: 2263
Joined: 09 Nov 2011 14:36

New software - Version 3.09

Postby Dataman (Daniel Smith) » 20 Oct 2014 11:26

Dear Dataman users,

New software has just been posted on our software pages for the Dataman 48Pro universal ISP programmer.

Version 3.09 features the following amendments:

New Device Support
Many new devices have been added in this revision, please download the full device list to verify your chip is supported: Dataman48ProDeviceList.pdf

Major Changes
Fixed "load project result not sent" to remote control problem for single remote control applications
Fixed serialization problem that reports error message: "Error writing serialization data to programmer buffer! (error code: 1)"
Fixed unwanted serialization incrementation before verify device operation (F8) for some serial eeprom devices
In PG4UWMC fixed serious bug in serialization modes From-file playlist and Custom generator using large serialization data files (over 4kB). The data above 4kB were not loaded to buffer, and no error was reported!

Other Changes
Added support of DIL48/QFP80 ZIF MN101-1
Atmel AT24C02D, verification procedure improved
BGA-Bottom-147, pgm. parameter assignment improved
DIL48/LQFP80-1 ZIF-CS NEC-1, adapter identification improved
Freescale Semic. MPC5517S [LQFP176], erase timeout extended
Freescale Semic. MK10/20/30/40DX256 70MHz devices, FlexNVM partition improved
Fujitsu/Spansion MB9BFx1xNBGL, MB9BFx1xTBGL devices, operations speedup
Fujitsu/Spansion MB9BFx1xNPMC, MB9BFx1xRPMC devices, operations speedup
Fujitsu/Spansion MB9BFx1xSPMC, MB9BFx1xTPMC devices, operations speedup
Fujitsu/Spansion MB9AF116NPMC [LQFP100], MB9AF116NAPMC [LQFP100] operations speedup
Fujitsu/Spansion MB9AF31xMPMC [LQFP80], operations speedup
Fujitsu/Spansion MB9AF34xNAPMC [LQFP100], operations speedup
Macronix same MX25L devices, sectors in the erase parameters options have been changed to blocks
Macronix MX25U3235F [USON8], changed device name and backward project compatibility correction
Microchip PIC18FxxK22, set of WDTPS bits improved
Renesas M38503G4AFP, added option "Blank check before programming"
Renesas uPD70F3529 [HLQFP176], programming speed increased
Samsung Hart-m310, added programing and erasing of Data Flash
STMicroelectronics STM32W108CB [VFQFPN48], problems with core halting on reprogramming treated (might produce various kinds of errors)
TI (TMS) MSP430xxx devices with DCO data, added device operation options "Blank DCO data in device terminates a programming operation"
TI (TMS) MSP430xxx devices with TLV data, added device operation options "Blank TLV data in device terminates a programming operation"
TI (TMS) LM3S3748 (ISP-JTAG), description of ISP connector pins added
TI (TMS) TM4C129DNC, programming improved
Toshiba TMPM324F10FG, dual support of adapter DIL48/LQFP144 ZIF TMPM324-1 added
Trident Microsystems, added support of TDA1xxxx device family

Bug Fixes
Atmel ATSAMD2xx1x [TQFP32], Programming and Insertion test bug fixed
Atmel ATtiny13/V (ISP-SPI)(OSCCAL), Separate verification error bug fixed when calibration is selected
Atmel ATtiny15/L, reading bug fixed
eMMC devices, settings of ENH_START_ADDR bug fixed
Freescale Semic. MC9S08PT32 [LQFP32], programming bug fixed
Freescale Semic. MK10DX256VLK7 [LQFP80], programming bug fixed
Freescale Semic. MK30DX256VLL7 [LQFP100], programming bug fixed
GigaDevice MD25D80, programming Status register bug fixed
Hitachi HD6473837H/3834H, bad device package dimensions fixed
Honeywell XD50C-FCL (M29F160FB), programming parameter fixed in PG4UWMC
Intel PC28F640P30B [Easy BGA64], ID check bug fixed
JESD230 decoder, parameters decoding fixed
Lattice devices, window "Addresses (hex)" in x1 organization bug fixed
Macronix MX25L3205 [SOIC16], insertion test error fixed
Macronix MX25L6406E (Dual O), block erase error fixed
Micron JS28F00AM29AWH [TSOP56], power-up sequence bug fixed
Sharp LH28F016SUT [TSOP56] x16, insertion test bug fixed
STMicroelectronics STM32L151C6 (ISP-SWD), "Unexpected error 1" bug fixed

Best regards,

Daniel Smith

Return to “Software Update Notifications”

Who is online

Users browsing this forum: No registered users and 4 guests