Dataman Forum

Hi dataman,

I have been trying to read an MX25L12835F with a DIL8W/SOIC8 ZIF 200mil SFlash-1a on a 48PRO2, I believe I am correct in thinking that this is the right adaptor, and it is failing out of hand with a 'bad adpator' failure, EC-30000000.

Any ideas on what could be causing this?


Cheers


G

Hello Gareth,

The device is support as:

Manufacturer: Macronix
Type: MX25L12835F [SOP8] (Quad I/O)
8-bit bytes: 1000200h (16,777,728 Bytes)
Organization: 1000200hx8 bit
Algorithm: Quad I/O SPI
Implemented in ver.: 2.97 or earlier
Modified in ver.: 3.00
Package Info: SOP(8) 200mil

Suitable adaptor for use with 48Pro2:
DIL8W/SOIC8 ZIF 200mil SFlash-1a or
DIL8W/SOIC8 ZIF 200mil SFlash-1 (discontinued)

So yes, you have the correct adaptor.

Can you make sure you are running the latest software version (currently v3.12/03.2015)

Please run the "Selftest..." routine from the Programmer menu and then recreate the error message you mention, once this is captured in the acivity log please use the "Help | Create problem report" feature and send me the resulting log file from your desktop for analysis.

If you have any questions, please contact me.

Best regards,

Neil Parker
Dataman Programmers

Hi Neil,

Thanks for the reply, it turns out that you were right, we were using an out of date software vers.

Thank you for your help.


Cheers


G