New software - Version 3.94
Posted: 05 Jun 2024 13:44
Dear Dataman users,
New software has just been posted on our software pages for the Dataman 848Pro2 super fast stand-alone gang programmer.
Version 3.94 features the following amendments:
New Device Support
Many new devices have been added in this revision, please download the full device list to verify your chip is supported: Dataman848Pro2DeviceList.pdf
Major Changes
64 bit version of remotelb.dll for 64-bit .NET applications was updated
Checksum calculator, buffers list encapsulated into scroll box due to window size limitation
Other Changes
Added adapter: BGA-Bottom-561
Added adapter: BGA-Bottom-562
Added adapter: DIL48/LGA37 ZIF-CS MBN52832
Added adapter: DIL48/QFN24-1.02 ZIF CM-1
Added adapter: DIL48/QFN44-7.02 ZIF LT-1
Added adapter: DIL48/QFP100-1.02 ZIF M16C/62-2
Added adapter: DIL48/QFP100-1.02 ZIF R7FA-3
Added adapter: DIL48/QFP32-1.04 ZIF-CS STM8-2
Added adapter: DIL48/QFP48-1.02 ZIF NEC-1
Added adapter: DIL48/QFP64-1.02 ZIF STM32U-1
Added support for new revisions of Alliance Memory ASFC4G31M-51BIN [FBGA153]
DIL8/QFN8-1 ZIF-CS SFlash-1a, insertion test modified
DIL8/QFN8-1 ZIF SFlash-1a, insertion test modified
DIL48/QFN48-2.02 ZIF EFR-1, interface update
DIL48/SOIC36-445-1.2 ZIF SX6-1, interface update
Analog Devices/Linear Technology LTC2972, added support of solo verification
Added support for CASN (Common Attributes of Serial NAND) page (new Macronix serial NAND feature)
Atmel/Microchip ATmega808/1608/3208 series in SSOP28 package, updated package drawing
Microchip AVR DA/DB/DD/EA/EB series in SSOP28 package, updated package drawing
STMicroelectronics STM32H7 series, programming method changed (introduced modes program all data, only data from file, only nonblank data; discarded mode program selected pages)
Bug Fixes
Adapter DIL8/QFN8-1 ZIF SFlash-1a, AutomaticYES! problem fixed
Adapter DIL8/QFN8-1 ZIF-CS SFlash-1a, AutomaticYES! problem fixed
Atmel ATmega328PB [MLF32](OSCCAL@5V), Access violation bug fixed
Atmel/Microchip ATmega328PB [VQFN32](OSCCAL@5V), Access violation bug fixed
GigaDevice serial NAND, partname decoder fixed
Lattice LAMXO3LF-4300E [caBGA256], bug Unexpected error 1 [IEC:1, D:27]! fixed, adapter assignment changed
Lattice LAMXO3LF-4300E [caBGA256], Error: Addresses out of device size, bug fixed
Lattice LCMXO2-640HC [TQFP100], improving of power up sequence, fixed verification error for specific PLD contents
Macronix MX25L25645G [SOP8] (Quad I/O), MX25L25645G (Quad I/O), MX25L25645G, reading Configuration register bug fixed
Microchip PIC8F4585, PICmicro checksum calculation bug fixed
Programming adapter: DIL48/SSOP20-200 ZIF AVR-1, Comm. error PC-programmer! bug fixed
STMicroelectronics STM32U5xx devices with 4MB Flash, blank check after erase bug fixed
Texas Instruments MSP432P401M, programming of Information memory bug fixed
Best regards,
Daniel Smith
New software has just been posted on our software pages for the Dataman 848Pro2 super fast stand-alone gang programmer.
Version 3.94 features the following amendments:
New Device Support
Many new devices have been added in this revision, please download the full device list to verify your chip is supported: Dataman848Pro2DeviceList.pdf
Major Changes
64 bit version of remotelb.dll for 64-bit .NET applications was updated
Checksum calculator, buffers list encapsulated into scroll box due to window size limitation
Other Changes
Added adapter: BGA-Bottom-561
Added adapter: BGA-Bottom-562
Added adapter: DIL48/LGA37 ZIF-CS MBN52832
Added adapter: DIL48/QFN24-1.02 ZIF CM-1
Added adapter: DIL48/QFN44-7.02 ZIF LT-1
Added adapter: DIL48/QFP100-1.02 ZIF M16C/62-2
Added adapter: DIL48/QFP100-1.02 ZIF R7FA-3
Added adapter: DIL48/QFP32-1.04 ZIF-CS STM8-2
Added adapter: DIL48/QFP48-1.02 ZIF NEC-1
Added adapter: DIL48/QFP64-1.02 ZIF STM32U-1
Added support for new revisions of Alliance Memory ASFC4G31M-51BIN [FBGA153]
DIL8/QFN8-1 ZIF-CS SFlash-1a, insertion test modified
DIL8/QFN8-1 ZIF SFlash-1a, insertion test modified
DIL48/QFN48-2.02 ZIF EFR-1, interface update
DIL48/SOIC36-445-1.2 ZIF SX6-1, interface update
Analog Devices/Linear Technology LTC2972, added support of solo verification
Added support for CASN (Common Attributes of Serial NAND) page (new Macronix serial NAND feature)
Atmel/Microchip ATmega808/1608/3208 series in SSOP28 package, updated package drawing
Microchip AVR DA/DB/DD/EA/EB series in SSOP28 package, updated package drawing
STMicroelectronics STM32H7 series, programming method changed (introduced modes program all data, only data from file, only nonblank data; discarded mode program selected pages)
Bug Fixes
Adapter DIL8/QFN8-1 ZIF SFlash-1a, AutomaticYES! problem fixed
Adapter DIL8/QFN8-1 ZIF-CS SFlash-1a, AutomaticYES! problem fixed
Atmel ATmega328PB [MLF32](OSCCAL@5V), Access violation bug fixed
Atmel/Microchip ATmega328PB [VQFN32](OSCCAL@5V), Access violation bug fixed
GigaDevice serial NAND, partname decoder fixed
Lattice LAMXO3LF-4300E [caBGA256], bug Unexpected error 1 [IEC:1, D:27]! fixed, adapter assignment changed
Lattice LAMXO3LF-4300E [caBGA256], Error: Addresses out of device size, bug fixed
Lattice LCMXO2-640HC [TQFP100], improving of power up sequence, fixed verification error for specific PLD contents
Macronix MX25L25645G [SOP8] (Quad I/O), MX25L25645G (Quad I/O), MX25L25645G, reading Configuration register bug fixed
Microchip PIC8F4585, PICmicro checksum calculation bug fixed
Programming adapter: DIL48/SSOP20-200 ZIF AVR-1, Comm. error PC-programmer! bug fixed
STMicroelectronics STM32U5xx devices with 4MB Flash, blank check after erase bug fixed
Texas Instruments MSP432P401M, programming of Information memory bug fixed
Best regards,
Daniel Smith