New software - Version 4.09
Posted: 30 Jan 2026 16:54
Dear Dataman users,
New software has just been posted on our software pages for the Dataman 448Pro2AP-AU gang programmer with built-in actuation unit.
Version 4.09 features the following amendments:
New Device Support
Many new devices have been added in this revision, please download the full device list to verify your chip is supported: Dataman448Pro2AP-AUDeviceList.pdf
Major Changes
Other Changes
Added module: AP1 QFN52-1.02 ZIF ISL-3
Added module: AP1 QFN52-1.02 ZIF MP-1
Added module: AP1 QFN8-3a ZIF SFlash-1
Added module: AP1 QFP48-1.02 ZIF R5F-13 (LD)
Added module: AP1 QFP64-1.01 ZIF M4xx-1
Added module: AP1 QFP80-1.02 ZIF TMS320-2
Analog Devices ADUC7024, programming procedure modified
Analog Devices DS28E05, Administrative Data need to be set in "Administrative Data" window <ALT+S>
Cypress CY27410, FS8 profile programming with customer data allowed
Cypress CYT family, power-up procedure modified
Dallas/Maxim DS28E05, Administrative Data need to be set in "Administrative Data" window <ALT+S>
GigaDevice GD25Q128E [SOP16] (QuadSPI), power-up procedure modified
Infineon XDP710-002, XDP710002XUMA1, verification improved
Intel PA28F008SA [PSOP44], reading/verification procedure modified
Lattice LCMXO2-256HC in TQFP100, power-up sequence improved
Micron MTFC2GMDEA-0M [WFBGA153], User Area updated to size 727FFFFFh
Bug Fixes
Atmel/Microchip AT91SAM7X256C [TFBGA100], programming procedure bug fixed
Microchip PIC12F508 [DFN8], programming bug fixed
Microchip PIC18Fx4Q20, configuration masks bug fixed
Microchip PIC18FxxQ20, programming SAFLOCK bit bug fixed
Micron NAND flash devices (x16), verification with enabled internal ECC controller fixed
Nuvoton M25x [QFP64], pin assignment bug fixed
TI (TMS) MSP430FR2033, programming procedure bug fixed
New software has just been posted on our software pages for the Dataman 448Pro2AP-AU gang programmer with built-in actuation unit.
Version 4.09 features the following amendments:
New Device Support
Many new devices have been added in this revision, please download the full device list to verify your chip is supported: Dataman448Pro2AP-AUDeviceList.pdf
Major Changes
Other Changes
Added module: AP1 QFN52-1.02 ZIF ISL-3
Added module: AP1 QFN52-1.02 ZIF MP-1
Added module: AP1 QFN8-3a ZIF SFlash-1
Added module: AP1 QFP48-1.02 ZIF R5F-13 (LD)
Added module: AP1 QFP64-1.01 ZIF M4xx-1
Added module: AP1 QFP80-1.02 ZIF TMS320-2
Analog Devices ADUC7024, programming procedure modified
Analog Devices DS28E05, Administrative Data need to be set in "Administrative Data" window <ALT+S>
Cypress CY27410, FS8 profile programming with customer data allowed
Cypress CYT family, power-up procedure modified
Dallas/Maxim DS28E05, Administrative Data need to be set in "Administrative Data" window <ALT+S>
GigaDevice GD25Q128E [SOP16] (QuadSPI), power-up procedure modified
Infineon XDP710-002, XDP710002XUMA1, verification improved
Intel PA28F008SA [PSOP44], reading/verification procedure modified
Lattice LCMXO2-256HC in TQFP100, power-up sequence improved
Micron MTFC2GMDEA-0M [WFBGA153], User Area updated to size 727FFFFFh
Bug Fixes
Atmel/Microchip AT91SAM7X256C [TFBGA100], programming procedure bug fixed
Microchip PIC12F508 [DFN8], programming bug fixed
Microchip PIC18Fx4Q20, configuration masks bug fixed
Microchip PIC18FxxQ20, programming SAFLOCK bit bug fixed
Micron NAND flash devices (x16), verification with enabled internal ECC controller fixed
Nuvoton M25x [QFP64], pin assignment bug fixed
TI (TMS) MSP430FR2033, programming procedure bug fixed