New software - Version 4.09
Posted: 30 Jan 2026 17:01
Dear Dataman users,
New software has just been posted on our software pages for the Dataman 48Pro2AP super fast industrial universal programmer.
Version 4.09 features the following amendments:
New Device Support
Many new devices have been added in this revision, please download the full device list to verify your chip is supported: Dataman48Pro2APDeviceList.pdf
Major Changes
Other Changes
Added module: AP1 QFN52-1.02 ZIF ISL-3
Added module: AP1 QFN52-1.02 ZIF MP-1
Added module: AP1 QFN8-3a ZIF SFlash-1
Added module: AP1 QFP48-1.02 ZIF R5F-13 (LD)
Added module: AP1 QFP64-1.01 ZIF M4xx-1
Added module: AP1 QFP80-1.02 ZIF TMS320-2
Analog Devices ADUC7024, programming procedure modified
Analog Devices DS28E05, Administrative Data need to be set in "Administrative Data" window <ALT+S>
Cypress CY27410, FS8 profile programming with customer data allowed
Cypress CYT family, power-up procedure modified
Dallas/Maxim DS28E05, Administrative Data need to be set in "Administrative Data" window <ALT+S>
GigaDevice GD25Q128E [SOP16] (QuadSPI), power-up procedure modified
Infineon XDP710-002, XDP710002XUMA1, verification improved
Intel PA28F008SA [PSOP44], reading/verification procedure modified
Lattice LCMXO2-256HC in TQFP100, power-up sequence improved
Micron MTFC2GMDEA-0M [WFBGA153], User Area updated to size 727FFFFFh
Bug Fixes
Atmel/Microchip AT91SAM7X256C [TFBGA100], programming procedure bug fixed
Microchip PIC12F1501, PIC12LF1501, PIC12LF1552, pins assign bug fixed for devices in DFN 8 package
Microchip PIC12F508 [DFN8], programming bug fixed
Microchip PIC18Fx4Q20, configuration masks bug fixed
Microchip PIC18FxxQ20, programming SAFLOCK bit bug fixed
Micron NAND flash devices (x16), verification with enabled internal ECC controller fixed
Nuvoton M25x [QFP64], pin assignment bug fixed
TI (TMS) MSP430FR2033, programming procedure bug fixed
New software has just been posted on our software pages for the Dataman 48Pro2AP super fast industrial universal programmer.
Version 4.09 features the following amendments:
New Device Support
Many new devices have been added in this revision, please download the full device list to verify your chip is supported: Dataman48Pro2APDeviceList.pdf
Major Changes
Other Changes
Added module: AP1 QFN52-1.02 ZIF ISL-3
Added module: AP1 QFN52-1.02 ZIF MP-1
Added module: AP1 QFN8-3a ZIF SFlash-1
Added module: AP1 QFP48-1.02 ZIF R5F-13 (LD)
Added module: AP1 QFP64-1.01 ZIF M4xx-1
Added module: AP1 QFP80-1.02 ZIF TMS320-2
Analog Devices ADUC7024, programming procedure modified
Analog Devices DS28E05, Administrative Data need to be set in "Administrative Data" window <ALT+S>
Cypress CY27410, FS8 profile programming with customer data allowed
Cypress CYT family, power-up procedure modified
Dallas/Maxim DS28E05, Administrative Data need to be set in "Administrative Data" window <ALT+S>
GigaDevice GD25Q128E [SOP16] (QuadSPI), power-up procedure modified
Infineon XDP710-002, XDP710002XUMA1, verification improved
Intel PA28F008SA [PSOP44], reading/verification procedure modified
Lattice LCMXO2-256HC in TQFP100, power-up sequence improved
Micron MTFC2GMDEA-0M [WFBGA153], User Area updated to size 727FFFFFh
Bug Fixes
Atmel/Microchip AT91SAM7X256C [TFBGA100], programming procedure bug fixed
Microchip PIC12F1501, PIC12LF1501, PIC12LF1552, pins assign bug fixed for devices in DFN 8 package
Microchip PIC12F508 [DFN8], programming bug fixed
Microchip PIC18Fx4Q20, configuration masks bug fixed
Microchip PIC18FxxQ20, programming SAFLOCK bit bug fixed
Micron NAND flash devices (x16), verification with enabled internal ECC controller fixed
Nuvoton M25x [QFP64], pin assignment bug fixed
TI (TMS) MSP430FR2033, programming procedure bug fixed