Dataman Forum

Posted: **14 Sep 2026 20:55**

If I were to used my own socket for the MT25QU256ABA8E12, where it had the following pin layout going to the zif adapter

1 13
2 14
3 15
4 16
5 17
6 18
7 19
8 20
9 21
10 22
11 23
12 24

would this work or does it have to be routed a certain way for the MT25QU256ABA8E12 program to work on the 48pro2?

Posted: **15 Sep 2026 09:20**

Hello Mpress_work,

The Micron MT25QU256ABA8E12 device in the TBGA24 package requires either the DIL8/BGA24-2 ZIF SFlash-1b or DIL8/BGA24-2 ZIF-CS SFlash-1 programming sockets.

Dataman do not release the pinout details or schematics of any of our programming sockets. Thank you for understanding.

Dataman Forum

Using my own socket on the 48pro2 for MT25QU256ABA8E12

Using my own socket on the 48pro2 for MT25QU256ABA8E12

Re: Using my own socket on the 48pro2 for MT25QU256ABA8E12