Programming the AT28HC256 with a binary file and received:
[2016 / 04 / 28 - 11:06:18] Verify
[2016 / 04 / 28 - 11:06:18] Verify Mode = 8 Bits
[2016 / 04 / 28 - 11:06:18] Verify Error Address = 0x00000040, Verify Data = 0x0000, Error IC Data = 0x00FF
[2016 / 04 / 28 - 11:06:18] Verify Fail!
[2016 / 04 / 28 - 11:06:18] ALL RUN Fail!
Can anyone help?
Verify Error
-
- Posts: 933
- Joined: 10 Nov 2011 09:51
Re: Verify Error
Hello Constantine Vu,
Can you tell me what the result of a Blank check before programming is on this device?
I have tested this selection in the S6 software with my sample of the AT28HC256 device and it works Okay.
Do you have any other devices to test with?
If you have any questions, please contact me.
Regards
Neil Parker
Dataman Programmers
Can you tell me what the result of a Blank check before programming is on this device?
I have tested this selection in the S6 software with my sample of the AT28HC256 device and it works Okay.
Do you have any other devices to test with?
If you have any questions, please contact me.
Regards
Neil Parker
Dataman Programmers
-
- Posts: 4
- Joined: 28 Apr 2016 15:36
Re: Verify Error
I updated software to 5.3.9.2 and it's working now.
Thanks
Thanks
-
- Posts: 933
- Joined: 10 Nov 2011 09:51
Re: Verify Error
Hello Constantine Vu,
Thank you for the update and I am glad that it is now working correctly for you.
If you have any other questions please do not hesitate to contact us.
Best regards,
Neil Parker
Dataman Programmers
Thank you for the update and I am glad that it is now working correctly for you.
If you have any other questions please do not hesitate to contact us.
Best regards,
Neil Parker
Dataman Programmers
Who is online
Users browsing this forum: No registered users and 0 guests