Split Data in Load Data File

Topics related to the Dataman S6
Constantine Vu
Posts: 4
Joined: 28 Apr 2016 15:36

Split Data in Load Data File

Postby Constantine Vu » 03 Aug 2016 18:08

Does anyone have a manual or explanation for all options in "Split Data" options?

Dataman (Neil Parker)
Posts: 931
Joined: 10 Nov 2011 09:51

Re: Split Data in Load Data File

Postby Dataman (Neil Parker) » 04 Aug 2016 09:23

Hello Constantine Vu,

Thank you for your question, the Split feature works as follows:

Split (default none) - this option allows you to set a special mode of buffer when programming or reading a device. Using the split options is particularly useful when using 8-bit data memory devices in 16-bit or 32-bit applications. The following table describes the buffer to device and device to buffer data transfer:
split.png
Explanation of terms:
Access to device address ADDR is written as Device[ADDR].
Access to buffer address ADDR is written as Buffer[ADDR].
ADDR value can be from zero to device size (in bytes).
All addresses are byte oriented addresses.

I hope this explains the function of the various split commands.

If you have any further questions, please do not hesitate to contact me.

Best regards,

Neil Parker
Dataman Programmers

Constantine Vu
Posts: 4
Joined: 28 Apr 2016 15:36

Re: Split Data in Load Data File

Postby Constantine Vu » 11 Aug 2016 14:31

That helps
Thanks
Constantine


Return to “Dataman S6”

Who is online

Users browsing this forum: No registered users and 4 guests