Split Data in Load Data File
-
- Posts: 4
- Joined: 28 Apr 2016 15:36
Split Data in Load Data File
Does anyone have a manual or explanation for all options in "Split Data" options?
-
- Posts: 932
- Joined: 10 Nov 2011 09:51
Re: Split Data in Load Data File
Hello Constantine Vu,
Thank you for your question, the Split feature works as follows:
Split (default none) - this option allows you to set a special mode of buffer when programming or reading a device. Using the split options is particularly useful when using 8-bit data memory devices in 16-bit or 32-bit applications. The following table describes the buffer to device and device to buffer data transfer:
Explanation of terms:
Access to device address ADDR is written as Device[ADDR].
Access to buffer address ADDR is written as Buffer[ADDR].
ADDR value can be from zero to device size (in bytes).
All addresses are byte oriented addresses.
I hope this explains the function of the various split commands.
If you have any further questions, please do not hesitate to contact me.
Best regards,
Neil Parker
Dataman Programmers
Thank you for your question, the Split feature works as follows:
Split (default none) - this option allows you to set a special mode of buffer when programming or reading a device. Using the split options is particularly useful when using 8-bit data memory devices in 16-bit or 32-bit applications. The following table describes the buffer to device and device to buffer data transfer:
Explanation of terms:
Access to device address ADDR is written as Device[ADDR].
Access to buffer address ADDR is written as Buffer[ADDR].
ADDR value can be from zero to device size (in bytes).
All addresses are byte oriented addresses.
I hope this explains the function of the various split commands.
If you have any further questions, please do not hesitate to contact me.
Best regards,
Neil Parker
Dataman Programmers
-
- Posts: 4
- Joined: 28 Apr 2016 15:36
Re: Split Data in Load Data File
That helps
Thanks
Constantine
Thanks
Constantine
Who is online
Users browsing this forum: No registered users and 1 guest